Added reply in a thread MX track porn 3/26/2017 9:30 PM

One of my personal favourites - "dreamland"

Added reply in a thread MX track porn 3/26/2017 5:52 PM

Added reply in a thread MX track porn 3/26/2017 5:15 PM

That's some nice dirt man

Added reply in a thread 2008 yz125 3/26/2017 3:27 PM

Yeah, because that got fully stripped down and everything was inspected. It's pretty darn rooted

Added reply in a thread MX track porn 3/26/2017 5:29 AM

Lucky we don't have cows. And tracks do start out never being ridden. Hold up a bit and I'll get you a pic with some ruts and breaking bumps.

Added reply in a thread MX track porn 3/26/2017 4:24 AM

That looks sick!

Started new thread MX track porn 3/26/2017 3:44 AM

Post some photos please, I'll start

This forum thread has 88 replies

Added reply in a thread 2008 yz125 3/26/2017 3:25 AM

So, Not much got done in the short time I worked this afternoon.

Footpegs got installed Here are a few "before photos" for you guys This is one of the power valve cover fasteners, too stretched to go ... more »
Added reply in a thread 2008 yz125 3/23/2017 4:30 AM

I'm from AUS. Dunno how to change my profile

ermm
Good beer though
Added reply in a thread 2008 yz125 3/23/2017 1:29 AM

Triple clamps back from powder coaters. That's the last of the parts that need coating so from here on in it's finding time to work on it and waiting for parts!
Added reply in a thread 2008 yz125 3/19/2017 4:24 PM

Ready for the powder coaters tonight, casting marks removed ... more »
Added reply in a thread 2008 yz125 3/18/2017 9:09 PM

That won't damage the strength of the rim? Because that's what I was thinking, just didn't want to start boring shit out and end up cracking a rim

Added reply in a thread 2008 yz125 3/18/2017 7:42 PM

I got the wheels laced up, but the front isn't quite right. As you can see, the nipples on the rear go all the way through, and the fronts dont. Not quite sure what to do because I was hoping they'd just slip right in. Any suggestions would be great!

... more »
Started new thread 2008 yz125 3/18/2017 6:18 AM

Hey guys, here is my yz125 that I'm doing a frame up on. Basically I wanted a 125 that looked good, one that I could keep for a while and ride when it suits. I'm also planning on finding a 08 250 and pretty much doing the same thing. Here's a couple

... more »

This forum thread has 103 replies

Added reply in a thread Metal shavings in gearbox/clutch area 3/9/2017 1:39 PM

Very small particals, but they weren't in the oil because there hasn't been any in there

Added reply in a thread Metal shavings in gearbox/clutch area 3/9/2017 1:38 PM

Did this ruin your motor in any way?

Added reply in a thread Metal shavings in gearbox/clutch area 3/8/2017 5:46 PM

Don't think you guys understood. It has a fresh bottom end and top end. The gearbox was apart and cleaned. I've let the motor sit for a while and pulled it apart before putting it into the frame. It hasn't been run before. I found some small shavings ... more »

Started new thread Metal shavings in gearbox/clutch area 3/8/2017 2:21 AM

So I just rebuilt my 08 yz125 and I've come back to the motor after its sit for a while and I decided I check over it all before putting finishing touches on it. I opened up the clutch and found a heap of metal shavings at the bottom of the cases. Is ... more »

This forum thread has 13 replies

Started new thread Jetting 2/27/2017 5:13 PM

I just got a fmf factory fatty and shorty, and vforce reeds for my 08 yz125. Do I have to change the jetting to suit and if so to what?

This forum thread has 3 replies

Added reply in a thread Not New Trucks 2/3/2017 3:32 PM

Sarcasm? Not trying to knock American cars, honestly a 6.5L chev diesel will probably end up in my ute