Added reply in a thread Favorite type of beer? Pilsner, lager or.....? 11/19/2018 1:51 PM

I have yet to find an IPA too bitter for my liking

cool
Added reply in a thread What is inside this 96 RM80 hub 11/13/2018 8:53 AM

That's the outer race of what used to be your bearing. The Yamaha and Suzuki 80/85 models were known to have soft aluminum on the hubs, once they groove out from bearing failure you should replace them. FasterUSA makes a strong billet aluminum replacement, ... more »

Added a comment to quiknic's bike check 11/5/2018 6:01 PM
QNR - Bradshaw YZ-125 Throwback Build

FasterUSA hubs, not sure why they get labeled as "other"

0 0 0

This setup has 12 comments.

Added reply in a thread Bradshaw YZ-125 Build Done Right - 2019 Style 10/31/2018 12:09 PM

Oh now this is clean!

Started new thread 02-04 CR250 Left Crank Case WANTED 10/31/2018 10:34 AM

Got our hands on a pretty roached bromobile of a 2002 CR250 recently. I heard a while back that these cases were discontinued/unavailable new, there's no source that's come about for these somewhere is there? Worst case scenario we're just going to get ... more »

This forum thread has 10 replies

Added reply in a thread Yellow Wheels for 2018 rmz450 10/31/2018 10:08 AM

There is a MAP Policy that RK Excel forces companies to abide by when advertising their products for sale online. I know it sounds dumb, but companies are supposed to list Excel products at those high retails when selling them individually online. Please ... more »

Added reply in a thread So you won the lottery, what gun do you buy? 10/26/2018 1:34 AM

I'd probably spend some money with Jesse James. I like his style in both motorcycles and firearms.

... more »
Added reply in a thread Christini Hybrid Dirtbike 10/3/2018 6:37 PM

Steve Christini does some really cool things

Added reply in a thread 2019 KX 450 Wheels? 10/3/2018 12:05 PM

Front hub is different for 2019

Added reply in a thread Luxon MX KTM 150SX Build - More Progress 9/27/2018 9:02 PM

Nice! I haven't really been checking the build section as of late, but now I will be

Added reply in a thread 2019 YZ250F Excel Wheels 9/14/2018 9:05 AM

That isn't true. Excel still makes their aftermarket Takasago rim in their Japan factory. I've never heard of a factory being located in Thailand, but I have heard of one in Malaysia which is where they make the stock rims and also their Notako rims. ... more »

Added reply in a thread 2001 cr250 is it worth it? 9/3/2018 7:16 PM

10K is a major stretch

Added reply in a thread Loosening spokes on KTM rear wheel 8/28/2018 8:05 PM

The rims are what's causing that, assuming you've torqued the spokes correctly. It'll keep happening too, because the rims are soft as butter due to both cheaper and lighter alloys being used. The spokes are worth replacing as well though, because one ... more »

Added reply in a thread Since some here get their news from NPR 8/28/2018 1:32 PM

Very interesting.

Added reply in a thread RAD Wheels, Bearing Replacement! 8/22/2018 11:43 AM

Should be 6205 for the rear, and 60/28 for the front.

Added reply in a thread Whats the rim width for a 2001 RM 125? 1.85" or 2.15" 8/16/2018 8:12 AM

1.85 is typical of Japanese 125's, you can use either.

Added reply in a thread Moto superstitions, phobias & routines 8/15/2018 8:25 PM

"One more" is the n-word of motocross

Added reply in a thread If you could go to a concert of a passed away musician? 8/14/2018 8:49 PM

Lemmy

Added reply in a thread Buckled Wheels/Bent Spokes refurb?? 8/14/2018 8:45 PM

Have you tried Central Wheel Components? They're located in the UK, so is Talon.

Added reply in a thread 1997 CR125 Rebuild, Lamson Style 8/14/2018 8:20 PM

Haha do what you what you think will look good. Gold rims wouldn't look too bad either. Look for cracks before you lace them up, rims (especially OEM ones) can split with age and powder coat sometimes hides it from first glance.