Added reply in a thread 02 CR250 Resto FINISHED 1/26/2022 4:22 AM

Was your cerakote the air cure or oven cure?

Added reply in a thread Does Hunter just get a free pass? 1/24/2022 9:04 AM

Should have got a better jump off the gate 🤷‍♂️

Added reply in a thread 02 CR250 Resto FINISHED 1/23/2022 3:30 PM

Killer work on this bike. All the right tools really help out. Keep the updates coming!

Added reply in a thread 02 CR250 Resto FINISHED 1/22/2022 7:03 PM

Can you post up the info on your zinc playing stuff and where you bought it?

Added reply in a thread Ktm 300 2001 to Gp Rep Build 1/11/2022 2:06 PM

Who did your fork coatings?

Added reply in a thread 02 CR250 Resto FINISHED 1/9/2022 4:52 PM

What’s the the specs on your air compressor for that vapor blaster?

Added a comment about feature Vital MX Pit Bits: Anaheim 1 1/9/2022 11:55 AM
FarleyMX25

Awesome shots! Keep them coming!

0 0 0

This feature has 33 comments.

Added reply in a thread ’05 CR250 winter refresh | Finished-Photo update! | 1/8/2022 9:19 AM

https://youtu.be/YOICaursduQ Watch and follow this guide

Added reply in a thread Durhamtown closed? 1/4/2022 7:23 AM

They posted the same message on their website. Sad day that place was like it’s own off-road city.

Added reply in a thread Cant get front rotor to stop dragging 1/4/2022 6:54 AM

Make sure the caliper sliders are clean and greased. It’s possible they may be packed full of dirt and not letting the caliper float.

Added reply in a thread ’05 CR250 winter refresh | Finished-Photo update! | 1/2/2022 9:55 AM

If you don’t have access to vapor blasting, aluminum brightener is a good alternative. Sweet ride!

Added reply in a thread YZ450 case saver 1/2/2022 7:01 AM

I ran it. I just used the stock bolts and pushed the collars out of the plastic guard.

Added reply in a thread Mullennix '02 CR250 1/1/2022 5:22 PM

What color coating is on your fork tubes and shock body?

Added reply in a thread Paint/ Clear coat question for vintage restoration 12/25/2021 2:49 PM

If it were mine to do I would use a 2k high gloss clear coat.

Added reply in a thread 2021 12 Days of MXmas - Yoshimura Cycling Chialo Pedals 12/25/2021 7:20 AM

Need these for my dh rig!

Added reply in a thread 22 tc 85 power valve rod 12/24/2021 1:57 PM

I don’t have an 85 so im not sure what that is. I just know that my 250s use that same rod and clip design in their power valve also.

Added reply in a thread 22 tc 85 power valve rod 12/24/2021 12:00 PM

Prying the arm off is how I’ve always removed the rod also

Added reply in a thread 22 tc 85 power valve rod 12/24/2021 11:59 AM

Slide it up in the slot and then push it into its groove to lock it in. Always stick a rag in the hole below to prevent loosing it in the bottom end.

Added reply in a thread 22 tc 85 power valve rod 12/24/2021 11:54 AM

That little clip pops out a little and then slides downward to come out.

Added reply in a thread 2021 12 Days of MXmas - Motion Pro Digital Tire Pressure Gauge 12/23/2021 5:31 PM

Sign me up!