Added reply in a thread 2007 RM125 Revival 2/22/2018 4:20 PM

So i ran the LECTRON carb and holy shit talk about a easy tune if anyone wants to upgrade their carb and have it good for a 10000 ft change in elevation or up their hp and fuel economy i highly recommended it. No jets! Took 5 min to dial her in. Look ... more »

Added reply in a thread 2007 RM125 Revival 2/13/2018 6:05 PM

I did not get any pics inside the cases but it is fairly simple as long as you keep track on what’s going on. And having schematics is always a plus.

Added reply in a thread 2007 RM125 Revival 2/13/2018 6:04 PM

Ya that’s what holds the needle in place an how you adjust your clip on the needle. I have pulled it multiple times adjusting the clip. But i had figured screw it and ordered a lectron carb and will be here tomorrow.

Added reply in a thread 2007 RM125 Revival 2/2/2018 6:18 PM

Alright now that i got her fired up and running anyone got a 134 kit and have some tuning specs to run off of? Runs like sheet. Fires up nice and it’s got a pep in it step giving her a couple cranks on the throttle but as soon as i take it down the street ... more »

Added reply in a thread 2007 RM125 Revival 1/30/2018 9:50 PM

Ya it’s the perfect amount of gold VS having the hoop gold i think it pops to much

Added reply in a thread 2007 RM125 Revival 1/30/2018 8:30 PM

Couldn’t be happier the way this build is turning out. As the parts trickling in its just getting me amped to get her on some dirt.

Added reply in a thread 2007 RM125 Revival 1/23/2018 5:44 PM

Just made the last and final order! She will be done and ready to rip in about a week! All said and done this rebuild has cost me a pretty little penny but well worth the build!

Added reply in a thread 2007 RM125 Revival 1/21/2018 1:15 PM

Graphics and seat cover are dialed. I hope there is not to many colors ??‍♂️ Hah. Graphics are designed on motocal so it’s one of a kind. Still need to get the air box done was not to sure what i was going to do with it until they were on the bike. Hopefully

... more »
Added reply in a thread 2007 RM125 Revival 1/7/2018 11:55 AM

Thanks man! And that was my thought behind it. Not sure there is a whole lot of color considering that guys rm is really vibrant. I’m digging this one tho can’t wait for the finish look

Added reply in a thread 2007 RM125 Revival 1/7/2018 11:53 AM

Ya i seen that they match up but i think I’m going to try out the pivot pegs and see how they work. They look clean and the concept is cool so we will see if they stay on.

Added reply in a thread 2007 RM125 Revival 1/5/2018 4:20 PM

And the orange lines are temps till i get new ones in

Added reply in a thread 2007 RM125 Revival 1/5/2018 4:19 PM

The graphics are mostly black it will tone down

Added reply in a thread 2007 RM125 Revival 12/28/2017 3:30 PM

Little by little she’s getting closer. Just two more orders and i should have everything to get her on the dirt to let her eat!

... more »
Added reply in a thread 2007 RM125 Revival 10/17/2017 10:00 PM

Slowly but surely this 125 is still being built. Lots to go still need wheels and tires plastics controls pegs new seat and miscellaneous little stuff. Hopefully Incan get it done before winter hits

Added bike check 2007 RM125 9/19/2017 12:20 PM
C138_img_5697
Added reply in a thread What caused this 9/17/2017 8:55 PM

Could be using the cheaper spark plug?

Added reply in a thread 2007 RM125 Revival 8/28/2017 9:41 PM

They are the gpi ones on eBay

Added reply in a thread 2007 RM125 Revival 8/20/2017 8:05 PM

MOTOR IS IN!

Added reply in a thread 2007 RM125 Revival 8/12/2017 8:16 PM

Had missed a part that needed to be replaced in trans but should be coming together mid next

Added reply in a thread Stripped frame repair 8/12/2017 1:01 AM

Re tap it