Added reply in a thread 79 RM125 build - FINISHED! 4/25/2021 5:54 AM

Not to get off track from Hammers thread, but definitely cool bikes around these years. I’ve got two G’s I’m workin on. Lots of nice parts for it..

... more »
Added reply in a thread 79 RM125 build - FINISHED! 4/25/2021 5:42 AM

Love the build. I built its little brother for my boy a few years back, the 80N

Added reply in a thread 1983 yz 125 rebuild HELP!!! 4/25/2021 5:25 AM

I’ve got several Ks. You may have to do a bit of maintenance and some checks before trying to get her running. I only just built up one of our engines last weekends and they rip. Clean carb thoroughly. Fresh gas. New plug. Air filter spotless. Timing

... more »
Added reply in a thread 1983 YZ125 Build 1/1/2021 4:52 PM

Hi RZRRacr, Good find on the K. They are a great bike. We have a few too. Lots of parts still available through Partzilla. http://yz125k.weebly.com/ has a lot of info on the bike with workshop manuals etc.. Did you have the J and K back in the day? I

... more »
Added reply in a thread 1980 Yamaha YZ125......parts wanted 12/27/2020 1:52 AM

Correct.. the 8mm studs used to pull out, as some of the G cylinder castings were soft. I used Suzuki 10mm studs that step down to 8mm. However, you can also use new 8mm studs, and get extra long helicoils or timecerts to fit. This didn't happen to all ... more »

Added reply in a thread 1980 Yamaha YZ125......parts wanted 10/17/2020 4:56 AM

There’s a good G Facebook page where u could post up a wanted ad. I just did a cylinder stud write up on the page, as they had issues with pulling studs. It’s a 1 year cylinder, so getting rare. Your bike in the pic looks great.

Added reply in a thread 1980 YZ125G suspension 9/13/2020 6:28 AM

You can fit an Ohlins, but they are not cheap.

Added reply in a thread 1983 YZ125 Build 9/13/2020 6:12 AM

I’ve just finished the white K rebuild. Even after rebuild, the engine had 3 air leaks. Base gasket, oil side crank seal and reed block. Replaced seal, and used copper coat gasket spray on the new gaskets. Passed leak down test. Then new Mikuni with

... more »
Added reply in a thread Am I crazy? Late thirties beginner looking to ride on Mx track 6/27/2020 8:31 AM

Im 55. Been racing on and off since i was 12. My body is pretty banged up, but my philosophy is that i cant take it with me when i go. You will be cursing if you get to an age that you wished you had hit a track on a dirt bike, but you were physically ... more »

Added reply in a thread 1980 Yamaha YZ 125 G 5/29/2020 1:17 PM

I don’t think so. We have two yz125ks that we’re trying to get running to race in a few Vmx meets. The G’s are just quietly plodding along in the background..

Added reply in a thread 1983 YZ125 Build 5/24/2020 7:59 AM

Ive just pulled the engines out of my two old girls for some work. New rods, pistons, brakes, fork springs and a few other fine tuning parts...

Added reply in a thread 1980 Yamaha YZ 125 G 5/24/2020 7:45 AM

Very nice G you have there, and i am glad your running it, and its going well. I have two of the old girls on the go at the moment. One is being built as a project show bike, and the other as a rider for some vmx meets. We have been gathering parts from

... more »
Liked a comment on the item 2005 Yamaha YZ250F Chad Reed Tribute bike 4/12/2020 6:04 AM

My first thought was...Chad Reed, then I read the Info, lol. Perfect !!

Added reply in a thread 1980 YZ125G 3/1/2020 8:33 PM

Bikes and parts are getting pretty rare now. We have a facebook page with lots of info.. You can post on there. I have two i am building up at the moment. Good luck. https://www.facebook.com/groups/741824749252893/

Added reply in a thread XR's Let's see em ! 2/25/2020 5:44 AM

Exhaust is probably still red hot and its got a full tank of juice too!!

Liked a comment on the item Good, Bad, 'n Ugly: High Point 6/19/2019 7:53 AM

I think Hunter Lawrence's 1-3 performance was the most impressive result out of the 250 class results. Think that should have been mentioned in here somewhere given it was kind of the surprise of the weekend.

Added reply in a thread Show Us Your Factory Replica Build!!!! 6/15/2019 11:52 PM

Lechien had a full factory works OW125 in 1983. I couldn't replicate it exactly, but built a tribute bike..1983 YZ125K

Added reply in a thread KTM sold 260,000 bikes last year... 6/15/2019 11:22 PM

Honda sold 20 million bikes.. https://www.statista.com/statistics/267277/worldwide-motorcycle-sales-of-honda/

Added reply in a thread 70,s bikes what you got? 6/5/2019 4:18 AM

I have a few 70's minis in the mancave...

... more »