Added reply in a thread Where shop have stock now ti-6 titanium exhaust kx250f 2021 &fmf yz250f2021 6/24/2021 12:33 PM

Pc just filled my order for the 21 kx250. I waited 3 months and all 100 were pre sold before they even had them. Distributors get whatever is left which was none in this case.

Added reply in a thread Let's see/review those 2019 kx450s 6/13/2021 10:06 AM

Pc had me use a 5.4 at 160lbs.

Added reply in a thread 19 and 21 kx250f suspension the same? 6/9/2021 4:27 AM

No, the 21 is Kyb spring forks and the shock is completely different. The newer fork lugs fit the bigger axle too.

Added reply in a thread Lightest 110/90-19 tyre 5/12/2021 6:23 PM

Hoosier was 11.2 lbs in the 110 size. I just weighed mine today.

Liked a bike check 2006 SR250 5/12/2021 6:04 PM
2006 SR250
Added reply in a thread Xtrigs ROCS KXF '16 5/9/2021 3:01 PM

Just a heads up, you can buy the new stem from Technical Touch to make these fit the 19+ Kx450 and 21+ Kx250. It was around $130.

Started new thread 2011 Kx450f KYB Forks 5/8/2021 9:27 AM

Kyb dual spring forks set up for 160A MX by Procircuit. These have national tubes and only have 4.9 hrs of use since being set up. I have 2k into these. Also includes original springs that were in them, unsure of rate. $1300

... more »

This forum thread has 1 reply

Added reply in a thread 2006 Kx250 5/7/2021 5:54 PM

I never said I expected to get 6, if someone is interested they will ask. The covers wore fast because I grip hard and ride sand mostly. This is the bike 4.9 hrs before I rode it, and how I had it.

... more »
Started new thread 2006 Kx250 5/6/2021 7:39 AM

Very low hour bike. I purchased it from the original owner 100% original with the stock chain never having been adjusted. I took it apart and all the bearings had the factory grease still. I put a new oem top end in to inspect and also had the cylinder

... more »

This forum thread has 8 replies

Added reply in a thread 2021 KX250 5/1/2021 12:48 PM

I made the switch from a 19 kx450 and I’m glad I did. I just got my vortex re flashed by John at Motormedicsracing and it really woke this thing up. Now it can lug down low and still pulls hard up top. Makes it feel awesome.

Added reply in a thread 1995 kx500 build 3/12/2021 8:29 AM

I’m building one now and I’m getting help from Alex Ward. He has a billet mount and we also ordered raptor ktm pegs that come with a mount for the other side. It has to be welded to the frame still. he also has some billet pieces including the exhaust ... more »

Added reply in a thread KX450 steering stem bearings 3/3/2021 4:33 PM

I think these frames hold water or moisture. If you don’t have the bottom skid plate on there’s open holes. I greased my 19 and let it sit in the garage for a few weeks. Took the clamps off to put my xtrigs back on and there was moisture on the stem. ... more »

Added reply in a thread Pro circuit ti-6 install 2/2/2021 12:58 PM

Congratulations man. I noticed you have the oem mid pipe clamp on there too? That’s not needed on aftermarket systems. You’ll love the bike enjoy.

Added reply in a thread Kxf shock in kx125 1/7/2021 6:57 AM

Well on my 250 it has the longer pc arm and I couldn’t even bolt the shock on the bike. I still think you have to shorten the shock slightly even with changing the arm. I had no interest in doing it.

Added reply in a thread Kxf shock in kx125 1/6/2021 2:24 PM

04-05 kx125 has the same clevis as the newer 4 stroke.. the difference is in the shock body length it's over half an inch.

Added reply in a thread Kxf shock in kx125 1/6/2021 2:22 PM

You can shorten the stroke but you'll lose suspension travel so the stock shock would be better. The longer linkage arm I've heard too... but again you're making changes when the stock shock would be better. I have a real kx a kit shock body so I don't ... more »

Added reply in a thread ISO 2004 KX125 FLO GREEN number plate 12/29/2020 2:00 PM

No sorry. But I got mine from this guy, he had a few at one point. https://instagram.com/mt_207?igshid=ne8hy3lld5xs

Added reply in a thread WTS 2019+ KX450 Parts 12/29/2020 1:12 PM

That’s what I was looking for, how much and do you have pictures. Thanks

Added reply in a thread WTS 2019+ KX450 Parts 12/29/2020 1:06 PM

Are the arcs billet or memlon? New or used?

Added reply in a thread ISO 2004 KX125 FLO GREEN number plate 12/29/2020 10:18 AM

I have one on my bike but they fade super fast. I didn't realize it until I went to put on a new front number plate graphic.