Added reply in a thread Ktm hard parts sx150 extreme head insert? 9/3/2020 7:02 AM

On these small bores, the insert alone isn’t going to make the bike night and day better. But if you do a combination like JD Jet kit, reeds, head insert, pipe, silencer and good fuel. 100% there is a nice noticeable gain.

Added reply in a thread Best WP revalve 9/3/2020 6:53 AM

Is it in the cards for you to convert your forks to KYB or buy cone valves? If so, I’d call Enzo, especially if you’re a KYB guy. They did a set for me and removed the cones for a traditional shim stack and they are one of the best ive ever rode on Ktm. ... more »

Added reply in a thread Ktm hard parts sx150 extreme head insert? 9/2/2020 7:45 AM

The sxs insert is good. I think they are all pretty comparable. I have VHM on my 125 and put a RTek on when I made it a 150

Added reply in a thread Light Weight Rotors 9/2/2020 7:42 AM

The light rim locks worked fine for me. Never on a 450 but fine on 250/350

Added reply in a thread Light Weight Rotors 9/1/2020 5:33 PM

I like the superlight Galfer rotor and ti hardware. Try and save weight on light tubes and rim lock as well.

Added reply in a thread Ktm 150sx talk me out of it 9/1/2020 1:31 PM

Added reply in a thread KTM SXF 350 2017 cutting out 8/30/2020 9:04 PM

A nice clean air filter? Could also been some bad gas or water got in the tank?

Added reply in a thread KTM SXF 350 2017 cutting out 8/30/2020 7:29 AM

Replace in line fuel filter. Fuel pump( if you have a buddy with a KTM you can try their whole tank. Check all electric connections and ground wires. I’d start there.

Added reply in a thread YZ250/125 garage sale 8/29/2020 5:10 PM

How much you looking to get?

Added reply in a thread Cone Valve - New Gen VS Previous Gen VS others 8/29/2020 5:07 PM

I have have the old tan set with large axle and the most current set that’s Champaign color with small axle. Fork action wise it’s only as good as the tuner. They can both me set up incredibly well. That goes for the black versions also. The biggest ... more »

Added reply in a thread YZ250/125 garage sale 8/29/2020 6:03 AM

Do you have photos of the pipe and silencers?

Added reply in a thread Hard chrome plating transmission 8/29/2020 6:00 AM

CryoHeat seems popular. They claim more durability. https://www.cryoheat.com/

Added reply in a thread Hard chrome plating transmission 8/28/2020 3:34 PM

I've done the ISF process that Yoshimura offers on my transmission and it felt like shifting was smoother.

Added reply in a thread 2020.5 KTM SKF shock linkage seals -- are they available? 8/25/2020 3:28 PM

I got them from AOMX. Took a bit because they were back ordered.

Added reply in a thread Litpro (XGPS160) mount location 8/24/2020 12:13 PM

It needs to be in plain site for GPS. Front fender or upper triple clamp is the safest.

Added reply in a thread Ktm sxf 250 2020 fmf 8/24/2020 6:39 AM

Yeah the Vortex is awesome. When you order it, let them know the exhaust you have bought. They have maps tuned and tested for each.

Added reply in a thread Ktm sxf 250 2020 fmf 8/23/2020 8:18 PM

As far as I’m aware all exhaust brands make the pipe for a stock ecu and fuel. So no remap required. But The exhaust will give tuners like Twisted Development a bigger range they can tune for.

Added reply in a thread 2018 CRF450 Electrical Issue? 8/23/2020 7:53 AM

Sounds like something in your wiring is loose. I’d check all the connections and ground wires. Make sure there’s no water in the connections. I’ve heard of the kill switch can go bad. You can disconnect to test.

Added reply in a thread 2020 KTM 350 best price in California 8/21/2020 7:04 AM

I drove to Sublimity Motorsports in Salem Oregon for the best deal last summer.

Added reply in a thread A family affair. From the Garage to Factory KTM 8/20/2020 2:52 PM

Great listen Mike! I had no idea about Scott's accident as a kid. He is a good man, always super nice when I see him at the track. You guys rule!