Added reply in a thread Mesh radiator covers on factory bikes. 9/27/2020 8:35 PM

I have some new twin Air ones I could sell.

Added reply in a thread Recommended gearing on 17 150sx 9/26/2020 2:16 PM

It’s track depending. I went up 2 teeth in the back for technical off-road. I liked up 1 tooth for MX.

Added reply in a thread 2016 Wp Trax shock 9/26/2020 9:33 AM

Yes it will fit.

Added reply in a thread BioDapt, by Solidworks. MX (and more) prosthetic leg video. Good production quality. 9/25/2020 3:10 PM

Have you tried contacting mike at BioAdapt for his shifter set up?

Added reply in a thread Want to put the 2020 crf250R gas tank on my 2020 crf250rx what’s needed. 9/23/2020 8:41 PM

I’d think it’s full bolt on within the same year. You sure the shrouds are different?

Added reply in a thread 2019 sx125 kickstart retrofit onto 2016-2018 9/22/2020 7:55 AM

I’d imagine it should all fit because the cases are the same

Added reply in a thread Diaphragm (DDS) clutch upgrade on 2017 125SX? 9/22/2020 7:54 AM

What advantage are you looking for the from DDS clutch?

Added reply in a thread XACT Pro compression clickers 9/22/2020 7:52 AM

I don’t think those would work. I don’t think you can unscrew the clicker adjuster. Try and call a tuner like Powerband racing. Maybe they have done something in the past.

Added reply in a thread Dual xgps160 with Litpro 9/21/2020 10:44 AM

Just start and stop when you put the helmet on at the truck in the same location. Another thing is that you need to make sure the GPS green light is solid and has a signal before you start recording. If it's blinking when you start I think it will throw ... more »

Added reply in a thread Sx150 new vertex top end Q? 9/20/2020 11:28 PM

They are the slightest difference in size for wear. I start my cylinders off with A then go to B after 50 hours and replate the cylinders at 100.

Added reply in a thread Diaphragm (DDS) clutch upgrade on 2017 125SX? 9/20/2020 11:23 PM

Upgrading to a full Hinson clutch would be more worth your money that a OEM DDS. Just my 2 cents.

Added reply in a thread 2019 KTM 250sxf draining battery rapidly!! 9/20/2020 11:20 PM

Who did the ecu? Will the battery drain with the stock ECU?

Added reply in a thread WP A kit vs KYB spring conversion for AER? 9/20/2020 11:18 PM

Both will be amazing if you use a good tuner. I suggest Powerband racing for cone valves and Enzo for the KYB conversion as well as Cone vavles. The positive with buy cone valves is that you can take them off the bike and sell them later. I’ve bought ... more »

Added reply in a thread Dual xgps160 with Litpro 9/20/2020 11:14 PM

Where do you have yours mounted? I’ve been using the XGPS for a year almost and 99% get good data. I have it mounted on the front fender right next to the number plate. I always double tap to start and double tap to stop. I also start and stop in the ... more »

Added reply in a thread JCR- Clutch perch with Built-in killswitch: Review 9/16/2020 6:47 AM

I have the Ride ones but constantly have problems with the connections inside the button coming loose. It’s easy fix by opening it up, just annoying to do if you bike won’t start or stop.

Added reply in a thread How do I clean motor from staining and oxidation on a ktm 9/16/2020 6:43 AM

I think you have to take the engine apart to a port blast. There’s potential to blast through a gasket if it was together.

Added reply in a thread sg12 vs tech 10 wider? 9/14/2020 12:26 PM

SG12, I size down 1 and run 2 foot beds. I have a wide foot, size 9 foot and wear size 9 normal shoes.

Added reply in a thread Ktm plastic shock collar /preload 9/13/2020 9:29 PM

Don’t you just need to take the spring off to change out the ring?

Added reply in a thread Intense Tazer MX inspired E-bike 9/13/2020 8:47 AM

Sounds like Shimano just did a recall on the new EP8 motor 🤦🏻‍♂️ More info to come... “ The issue, we’ve been told, is that the motor body is subject to cracking when the drive is employed as a stressed part of the bike’s frame. Shimano has subsequently ... more »

Added reply in a thread Ktm plastic shock collar /preload 9/13/2020 7:58 AM

Try and use your hand or a more blunt than object like a thin socket extension. XTrig makes the adjuster that you use a 8mm T handle and just spin it.