Added reply in a thread KX 500 9/1/2017 10:42 PM

Your bike looks exactly like one that was on Albuquerque's Craigslist market for like 4 months.

Added reply in a thread 2018 updates to 17 AER 48? 7/31/2017 12:08 PM

How many hours?

Added reply in a thread 16 ktm bike acting weird 7/30/2017 6:31 PM

I would recommend a lesson in grammar and sentence structure. Your post gave me cancer.

Added reply in a thread 2018 updates to 17 AER 48? 7/28/2017 10:34 AM

FC has the parts now and will do it. I imagine it's pretty close to the same price.

Added reply in a thread Exhaust pipe guard/frame guard 7/10/2017 6:45 AM

I trimmed my side panel and took some heat shielding I had from a silencer cover I smoked and wrapped it around the pipe in that spot. Go to your local auto shop and buy some header wrap. Secure it with the stainless steel zip ties or safety wire.

Added reply in a thread 17 FX450 Slip On and Remap from Tokyo Mods 7/8/2017 10:22 AM

Rode the bike today. There's more power everywhere with more overrev. It flat out rips. If you're on the fence, you shouldn't be. Knowing what I know now, I'd gladly pay for the remap if it wasn't free with my pipe.

Added reply in a thread 17 FX450 Slip On and Remap from Tokyo Mods 7/7/2017 10:06 PM

Do you know off the top of your head if the stock filter is flame retardant? I believe all twin air filters are, but I just want to be sure before I put a two stroke cage in it.

Added reply in a thread No Toil? 7/7/2017 8:12 PM

I've gone back and forth between No Toil and Twin Air filters over the years and haven't noticed any tangible difference. I have always used No Toil cleaner and oil and its never done me wrong in 14 years.

Added reply in a thread 2015 Xc 300 midrange flutter/stumble 7/7/2017 6:04 PM

I would reconfirm the Z dimension. The screw may have come loose and the power valve might be misadjusted.

Added reply in a thread 2015 Xc 300 midrange flutter/stumble 7/7/2017 5:22 PM

Power valve?

Added reply in a thread Ktm style axle blocks for yz250? 7/7/2017 12:29 PM

Buy the "Bolt" branded ones. I had them on my YZ450F and they were dope.

Started new thread 17 FX450 Slip On and Remap from Tokyo Mods 7/7/2017 12:08 PM

For anyone who is looking to get an exhaust for their 250, 350 or 450, take a hard look at going through Tokyo Mods. The stock exhaust is extremely restrictive (and sounds like an XR50). Putting a new exhaust, as has been noted all over the internet, ... more »

This forum thread has 7 replies

Added reply in a thread 2006 KTM 380 project 7/7/2017 11:00 AM

I think there is a guy on KTM Talk that did a similar build.

Added reply in a thread AER 48 Revalve 7/7/2017 10:58 AM

It ended up being around $980 after shipping with an Xtrig adjuster. I already had the correct shock spring before I shipped everything off.

Added reply in a thread suspension 7/6/2017 4:57 PM

I like turtles.

Added reply in a thread 01 yz125 ground up build 7/5/2017 9:37 PM

Awesome. I shredded on one of these when I was a young cat. I rode it 4-5 days a week. All I did was keep the filter clean and put a new piston and rings in it every once in a while. That bike just wouldn't die. It was one of the best bikes I ever owned. ... more »

Added reply in a thread AER 48 Revalve 7/4/2017 7:55 AM

Yes, they changed the midvalve settings. I'm not sure what they did exactly, but it fixed the issue and allowed me to run a lower pressure. I was having to run around 148 psi before the revalve to keep the fork from diving in corners and soak up the ... more »

Started new thread WP Shock Springs 7/3/2017 9:28 AM

One is a 45 n/mm and the other is a 42 n/mm. Both are take-offs and have less than an hour on each. PayPal, CONUS shipping only. $70/ea

This forum thread has 3 replies

Added reply in a thread Husky/KTM Remapping & *Stumbling Issue* 7/2/2017 5:30 PM

Good to hear. Mine comes back from Tokyo mods with my slip on this week. I'll report back after the first ride with it.