Added reply in a thread sss forks on complete sss front end on ktm? 9/14/2017 7:39 AM

I would appreciate a copy, my email is leetaylor891@gmail.com Many thanks, sir!

Added reply in a thread Henry Miller needs a bike for Ironman... 8/23/2017 6:25 AM

I wouldn't be surprised to see mxsports look the other way with the yz250. In years past when people were showing up on them, they were supposed to be 09 models or something specific like that, as that was the last year they paid the homologation fee ... more »

Added reply in a thread Opinion of the 2015 KX250F? 8/16/2017 6:10 AM

I rode kx250f's 2013-15. They're solid bikes. If you get that bike, that year model they went to a heavier flywheel to rev similar to the ktm. If you want a really snappy feel, find a 13-14 flywheel on eBay. I loved the suspension on all of mine 2013-2015 ... more »

Added reply in a thread TM at Loretta's 8/3/2017 6:17 AM

From what I understand, the U.S. importer is more interested in bringing in the two stroke models, at least for the time being. Those TM 85's and 100's are really cool if you get a chance to look one over. Aluminum frames, a massive clutch for a little ... more »

Added reply in a thread What will Jeremy Martin's penalty be? 7/22/2017 5:32 PM

For what it's worth if you've never ridden up that very top section, there's a chance you won't make it up if you come to a stop before it. You'll see in B group practices dudes mess up in the ruts or not realize how steep it is and end up stuck halfway ... more »

Added reply in a thread KX250F Piston help (newbie) 4/22/2017 4:58 AM

Performance wise, the stock piston is great in that bike, very "free revving". Unfortunately they are prone to cracking, so on my kx250f's that I practiced on I ran forged pistons. Stock compression on that motorcycle is 13.2:1, I was kind of surprised ... more »

Added reply in a thread 2017 Husqvarna FC450 - FINISHED 4/19/2017 5:45 AM

Just a heads up, you might wanna watch that shifter bolt like a hawk. I tried using a different bolt and washer with some loctite and found out there's a reason they usually have two lock washers.

Added reply in a thread Any tracks you'd recommend in Arkansas? 3/1/2017 7:12 PM

Running a hot tub store in Arlington, getting to ride once or twice a week again. Hope all is well in AZ!

Added reply in a thread Any tracks you'd recommend in Arkansas? 2/27/2017 8:56 PM

As far as the actual race tracks there, they are few and far between and depending on what you'd expect, you may be disappointed. There are however, some cool practice tracks and public places to ride. If you're going to be near Hot Springs, be sure ... more »

Added reply in a thread Deano 1/29/2017 6:25 AM

My hypothesis (warning, pure speculation): he ends up riding east coast on a Trader's Yamaha. Basis for my guess: -Trader's commented on his Instagram before supercross started offering the ride. -the move to O'Neal seemed surprising, but that's what ... more »

Added reply in a thread Arenacross tracks 1/20/2017 8:25 AM

Something I've wondered, especially now that it is the "Road to Supercross," is why don't they try to use larger venues like the open air one they had last year (which unfortunately was a mudfest), or even contacting universities to use their stadiums? ... more »

Started new thread Kawasaki wheel set (needs rims) $100 1/17/2017 2:46 PM

Selling my spare wheel set from my Kawasaki days. Will fit all KX250F and KX450F and I'm told two strokes as well. Comes with spokes, nipples, hubs (bearings are good), rim locks, and rear rotor. Both rims have a small crack and should be replaced. $100

... more »

This forum thread has 1 reply

Added reply in a thread 2015 trax on 2016 KTM!? 1/7/2017 5:32 PM

Whoa, I never knew how the trax worked. That's fascinating. This shock is set up for supercross and currently doesn't have the trax feature enabled to keep the rear wheel from dropping in the whoops, but I plan on using the trax feature as it'll be set ... more »

Added reply in a thread 2015 trax on 2016 KTM!? 1/7/2017 8:12 AM

Weird, hadn't heard of spring issues on a ktm since the old link-less progressive wound springs, but that's good to know. The 2013 trax rear shock spring I have is 260mm long. The hours on the spring won't really be an issue as the spring is going to ... more »

Added reply in a thread 2015 trax on 2016 KTM!? 1/6/2017 9:58 PM

Sorry to drag up a slightly old thread, but I bought a set off of a 2013 model yesterday and the eye to eye length of the shock is 480 mm. I'm inclined to think 3 millimeters is close enough to give it a try. The previous owner ran it on his 2013 for ... more »

Added a comment about feature Vital MX 12 Days of MXmas, Day 13 12/23/2016 3:22 PM
CLT809

mmmmmm dem goggles

0 0 0

This feature has 256 comments.

Added a comment about feature ​Vital MX 12 Days of MXmas, Day 8 12/22/2016 7:18 PM
CLT809

Noice

0 0 0

This feature has 321 comments.

Added a comment about feature Vital MX 12 Days of MXmas, Day 11 12/22/2016 10:27 AM
CLT809

oooooh

0 0 0

This feature has 274 comments.

Added a comment about feature ​Vital MX 12 Days of MXmas, Day 12 12/22/2016 10:25 AM
CLT809

bananas

0 0 0

This feature has 287 comments.

Added a comment about feature ​Vital MX 12 Days of MXmas: Day 10 12/19/2016 9:48 PM
CLT809

Just broke a pair where the metal meets the carbon fiber. Winning one of these would make the 10,000 email notifications of everyone else entering worth it haha

0 0 0

This feature has 316 comments.