BryceJefferson33j's Forum Activity

New thread 02-04 yz250 suspension 1/3/2020 3:56 PM

What is your opinion on the suspension on these bikes? if I did the fork conversion from a yzf would that work ok with the shock or should i get the newer style shock. What all would the suspension swap entail, just pressing bearings on the clamps for ... more »

This forum thread has 6 replies.

New thread KYB SSS forks on a 19’ rmz250/450? 12/31/2019 4:32 PM

Does anybody know if the fork diameter at the clamps on a set of 11’ yz250f forks is the same as the diameter as the 19’ rmz forks? Wondering if the 19 rmz clamps will work on the 11’ 250f sss forks. Thanks for any help, I would run the complete yz front ... more »

This forum thread has 1 replies.

New thread Part number searches 12/31/2019 12:36 PM

Is there anywhere where I can put a vin number in for example a 15’ yz250f frame and it spits out what year bikes this frame will work for. I would like to use something like that when parting out to figure out part compatibility ALOT faster. Thanks

This forum thread has 3 replies.

New thread Cab I use a KYB sss rear shock on a 18'+ rmz450 or 19'+rmz250? 12/30/2019 1:36 PM

How hard would it be to utilize the KYB sss shock on a new stye rmz? could i change out the bottom part of the shock were it looks different?

This forum thread has 7 replies.

New thread Crf80 uni filter straight to carb 7/23/2018 1:15 PM

If you run a uni air filter straight to the carb, not using the air box what do you do with the crankcase breather hose that typically is run into the air box. Should be the same for all xr's and crf's 80-100cc. Thanks for any help

This forum thread has 1 replies.

New thread xr/crf 80/100 air filter straight to carb 6/25/2018 7:07 PM

I have a 2006 crf80 pitbike that I would like to put a uni air filter straight to the carb without the airbox. I am wondering if anyone has done this or know's what uni filter I need to use, do I still use a crf80 air filter?

This forum thread has 11 replies.

New thread Number plate decal protection 4/15/2018 6:19 PM

Would anyone be interested in rear shroud protection that protects either bare plastic or your graphics. With grip or without let me know

This forum thread has 11 replies.

New thread Mx boot decals 4/15/2018 4:03 PM

Who would be interested in the idea of high quality boot decals custom to the boot brand and model not just a generic decal set. It would be fully customizable (color,sponsors,names and templates). Let me know if you have any suggestions on how to improve ... more »

This forum thread has 4 replies.