Added reply in a thread 02-04 yz250 suspension 1/3/2020 4:07 PM

Also how does the stock 03' suspension compare to what comes on a cr,kx or rm. Just to get an idea

Started new thread 02-04 yz250 suspension 1/3/2020 3:56 PM

What is your opinion on the suspension on these bikes? if I did the fork conversion from a yzf would that work ok with the shock or should i get the newer style shock. What all would the suspension swap entail, just pressing bearings on the clamps for ... more »

This forum thread has 7 replies

Started new thread KYB SSS forks on a 19’ rmz250/450? 12/31/2019 4:32 PM

Does anybody know if the fork diameter at the clamps on a set of 11’ yz250f forks is the same as the diameter as the 19’ rmz forks? Wondering if the 19 rmz clamps will work on the 11’ 250f sss forks. Thanks for any help, I would run the complete yz front ... more »

This forum thread has 2 replies

Started new thread Part number searches 12/31/2019 12:36 PM

Is there anywhere where I can put a vin number in for example a 15’ yz250f frame and it spits out what year bikes this frame will work for. I would like to use something like that when parting out to figure out part compatibility ALOT faster. Thanks

This forum thread has 4 replies

Added reply in a thread 2018 Rmz450 Older Shock 12/30/2019 5:48 PM

what year kx450 shock works on the 2018 plus rmz 450 and 2019 plus rmz 250? thanks in advance

Added reply in a thread Cab I use a KYB sss rear shock on a 18'+ rmz450 or 19'+rmz250? 12/30/2019 5:42 PM

so a 06'-08' kx450 shock will fit the rmz250/450 19'?

Added reply in a thread Cab I use a KYB sss rear shock on a 18'+ rmz450 or 19'+rmz250? 12/30/2019 5:41 PM

not the same one

Started new thread Cab I use a KYB sss rear shock on a 18'+ rmz450 or 19'+rmz250? 12/30/2019 1:36 PM

How hard would it be to utilize the KYB sss shock on a new stye rmz? could i change out the bottom part of the shock were it looks different?

This forum thread has 8 replies

Started new thread Crf80 uni filter straight to carb 7/23/2018 1:15 PM

If you run a uni air filter straight to the carb, not using the air box what do you do with the crankcase breather hose that typically is run into the air box. Should be the same for all xr's and crf's 80-100cc. Thanks for any help

This forum thread has 2 replies

Added reply in a thread xr/crf 80/100 air filter straight to carb 6/25/2018 7:19 PM

How would you go about doing that

Added reply in a thread xr/crf 80/100 air filter straight to carb 6/25/2018 7:16 PM

Just doing it for simplicity

Added reply in a thread xr/crf 80/100 air filter straight to carb 6/25/2018 7:14 PM

Is that for a standard airbox setup or is that straight to the carb

Started new thread xr/crf 80/100 air filter straight to carb 6/25/2018 7:07 PM

I have a 2006 crf80 pitbike that I would like to put a uni air filter straight to the carb without the airbox. I am wondering if anyone has done this or know's what uni filter I need to use, do I still use a crf80 air filter?

This forum thread has 12 replies

Added reply in a thread Number plate decal protection 4/18/2018 10:40 AM

How did you hold them onto the plastics

Added reply in a thread Number plate decal protection 4/15/2018 7:58 PM

Not advertising just an idea I had and thought could potentially work as a small business but ok thanks for your input.

Added reply in a thread Mx boot decals 4/15/2018 7:43 PM

Nope just starting small business

Added reply in a thread Mx boot decals 4/15/2018 7:42 PM

@

Started new thread Number plate decal protection 4/15/2018 6:19 PM

Would anyone be interested in rear shroud protection that protects either bare plastic or your graphics. With grip or without let me know

This forum thread has 12 replies

Started new thread Mx boot decals 4/15/2018 4:03 PM

Who would be interested in the idea of high quality boot decals custom to the boot brand and model not just a generic decal set. It would be fully customizable (color,sponsors,names and templates). Let me know if you have any suggestions on how to improve ... more »

This forum thread has 5 replies