Bruce372's Forum Activity

Reply to LL's Bench Racing Aug 1-6 2022 8/4/2022 5:42 PM

Lol. But there is identifying and also qualifying? I am not knocking anyone, it's just my brain can't comprehend the sports most hyped and resourced rider that appears to be performing at pro level is only in B class.

Reply to LL's Bench Racing Aug 1-6 2022 8/4/2022 4:49 PM

I don't understand amateurs mx. Can someone explain Deegan, I thought he is signed to a factory Yamaha going pro ama ? Sx or mx? He must be pro level speed to sign, but still in B class? Who are the people in A class?

Reply to KTM 125sx Keihin 38mm Jetting 8/4/2022 6:54 AM

http://www.vitalmx.com/forums/Tech-Help-Race-Shop,42/2022-ktm-125xc-with-keihin-38-a-s,1403367

Reply to KTM 125sx Keihin 38mm Jetting 8/4/2022 6:50 AM

Did anyone complain about ktm125 jetting for the 20 years before they swapped to mikuni? I can't remember, lol. But Nozi and NIEF have come as oem needles for the ktm125 for a very long time so thats why I am suggesting it as a starting point. If you ... more »

Reply to 2006 RM 250 sitting for 14 years 8/3/2022 6:01 PM

Fresh gas, check rad fluid and go rip

Reply to KTM 125sx Keihin 38mm Jetting 8/3/2022 2:21 PM

On the 2018 150, fmf main pipe makes a small improvement. But all silencers apart from pc shorty are worse than stock. The 150 likes a big opening at the end of the silencer! On 150, HGS we dynoed made less power apart from maybe 0.5hp over stock for ... more »

Reply to KTM 125sx Keihin 38mm Jetting 8/3/2022 12:35 PM

I think those needles are straight taper. 6.5 and 7 slide are quite similar, slide overlaps with pilot and needle diameter so that is a tuning option

Reply to KTM 125sx Keihin 38mm Jetting 8/3/2022 12:17 PM

2016 ktm125 is similar engine to 2019, so use that jetting starting point. I think it's 50p, 175 main and NOZI. We also run the 2016 carb manifold and hose clamp that seats the keihin carb properly

Reply to KTM 125sx Keihin 38mm Jetting 8/3/2022 12:13 PM

I've used keihin carbs on multiple 125s and 150s, I would stay away from the straight taper keihin needles, I always had detonation issues. The KTM Oem needles will work, NOZI or NIEF etc. The only issue is getting the needle diameter matched up perfectly ... more »

Reply to Nico Izzi ?? (Update: Nico Returns to Racing in 2022) 8/3/2022 11:45 AM

Or he could have bought bit coin like all the kids of that age group right now and he'd have enough left for just a big Mac and no fries.

Reply to Holes in the airbox 8/2/2022 11:24 PM

Years ago, headaches were treated by drilling holes in people's skulls because they thought it would let the demons out. So let the demons out of your engine

Reply to KTM OEM Wheels 7/29/2022 9:05 PM

You can buy single spokes and nipples not that expensive lol!!!

Reply to MXoN - Team Australia: Full Factory HRC? 7/28/2022 10:16 PM

If Jett wins the championship one round early, does he race the 450 at the last national?

Reply to How to reduce engine braking - 2022 KTM450sxf 7/28/2022 9:01 PM

Turn up the BASS!!!!

Reply to Mike Alessi Loretta Lynn's 7/28/2022 8:01 PM

In mx, that is one cool achievement. Good for you dude!!!

Reply to Spoke With Our Wallets 7/27/2022 9:55 PM

The 2015,2017 rmz450 imo is the best one imo. Loved the suspension. You are in Santa Rita right?

Reply to Spoke With Our Wallets 7/27/2022 9:23 PM

Did you sell your 450 yet?

Reply to Spoke With Our Wallets 7/27/2022 8:47 PM

Congrats dude. I think the next bike for my kid is a 250 smoker, so don't blink and make wonderful memories.

Reply to Nico Izzi ?? (Update: Nico Returns to Racing in 2022) 7/26/2022 8:12 AM

What are the name of the Pfizer drugs you are talking about causing skin issues?