I have a cylinder head that was removed for a mod head at 30 hours. It will also included piston and cam. $650 Oem titanium tank $150 was removed for a carbon fiber tank at 30 hours. I have plenty of pictures please PM or comment below with email.

bump gas tank sold, still have head
I have new with tags red fly kinetic gear 34 n large $115 shipped 518-269-7988 text
It's cerakote vpe racing did it out of south Carolina
It includes cam valves etc pretty much complete head except temp sensor header studs things I had to swap over to new head. Ill send you a email
I have a cylinder head that was removed for a mod head at 30 hours. It will also included piston and cam. $650 Oem titanium tank $150 was removed for a carbon fiber tank at 30 hours. I have plenty of pictures please PM or comment below with email.
This forum thread has 7 replies
Pm sent
I have forks PM if interested
Got ya so there are two red caps versions
Also any older a kit fork made for a pre 19 is not a direct placement to the 19 and newer models like what was stated in the above add mx locker posted. The front axle is different diameter and you would need to use a pre 19 front wheel to use pre 19 ... more »
In the link he compared oem stuff to the red caps a kit. The only real difference other the. Bling and coatings is the a kit can adjust the spring perch. And a titanium post for valving. The shock has differences from the stock one. I truly believe the ... more »
I'm pretty sure you have it backwards. The red caps are the oem version. The PC set with the fork caps in the first pics have the larger cartridge. Mine have the red caps like what's in this link and 2cnd screenshot below. https://m.facebook.com/story.php?story_fbid=727785704270682&id=225903597792231
It works on 09 to 12 to if they use the 13 to 14 poston
I have a new never mounted devol x shot - text 518 269 7988 50$ shiped
The sellers set up will fit your bike, however, you would need to have your top triple clamps bored out or purchase his Xtrig clamps the seller has. (look at the inside of the top clamp - it is silver on the inside because it has been bored out. To answer
Do you happen to have the o2 sensor kit as well?
Bump for a good seller and someone that can tune these things.
Still available?
If you end up parting out I'd be interested in the throttle body and some other parts. Also that's an FMF exhaust
I have a kxf set
M10 or m12 and 7/8 or 1 1/8 ? I have some M12 7/8 monts