BAMX

BAMX

Lives in: Fallbrook, CA USA

Member since: 01/22/12

Recent Activity Filter:

New thread Showa Shock piston question. 4/9/2019 4:59 PM

Does anyone know the secret to easily getting a new shock piston ring/band on a Showa shock piston? I am talking about the OEM style not the split Race Tech style. Any help would be appreciated. The bike is an 06 RM250 if that matters.

This forum thread has 3 replies.

New thread crf 450 swing arm question 1/15/2019 9:09 AM

I have a buddy who needs a swing arm for an 06 CRF450R. There is a nice 07 swing arm on Ebay but it has a different part number than the 06. Does anyone know what the difference between an 06 and 07?

This forum thread has 1 replies.

New thread Just one more reason Rocky Mountain kills the Dealers 1/14/2019 10:56 AM

I got this over the weekend. Keep in mind that is was totally unsolicited.

This forum thread has 42 replies.

New thread D37 Sprint Enduro 12/27/2018 7:13 PM

Is anyone here headed to the first round? It doesn't seem like much of a sprint enduro but, at least it is a start.

This forum thread has 25 replies.

New thread 04 RM125 build for the rest of us...done 11/29/2016 6:37 PM

The idea of this build is to get a nice bike which I can race some enduros with. The other idea is to do it economically. I would like to stay around $1000 total. I don't have anything against the bling or A kits of some other builds but it isn't in

... more »

This forum thread has 50 replies.

New thread Stole KTM FE recovered looking for owner 3/3/2016 11:38 AM

This was on the D37 message board. From what the post says, the bike has the numbers ground off but it has the limited edition number. With as few of these as there are out there. maybe someone here knows who had their FE stolen. The link below has contact ... more »

This forum thread has 1 replies.

New thread 13 YZ250F jetting for altitude 6/29/2015 3:19 PM

I was wondering if anyone has jetting specs for a 13 YZ250F at altitude. We are going to be riding at 7000 ft and above.

This forum thread has 0 replies.

New thread RG3 Triple Clamps 2/10/2015 2:53 PM

Does anyone know where my buddy can get the rubber dampeners for RG3 triple clamps. He just called them and they said that they are out and that they don't even know if they will ever have them in stock again. Are they generic to some other application? ... more »

This forum thread has 4 replies.

New thread AC news 12/11/2014 9:43 AM

Bummer

This forum thread has 86 replies.

New thread What piston to run? 5/21/2014 7:19 AM

Since there are always questions about this, here is a link to an MXA article that gives a bunch of piston info. http://motocrossactionmag.com/news/the-tortured-life-of-the-piston-in-your-trusty-but-rusty-bike?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+MxaNews+%28mxa+news%29 ... more »

This forum thread has 1 replies.

New thread 2015 schedule wtf? 5/2/2014 10:20 AM

Still 3 Anaheim's and then move the San Diego race downtown to Petco. The only reason I even go to San Diego is to tailgate and that is gone. Thank God for live TV.

This forum thread has 49 replies.

New thread Guy B photo bomb 3/26/2014 12:15 PM

Nice photo bomb from Guy B. What were you so stoked about?

This forum thread has 21 replies.

New thread WP40 is tough 2/23/2014 3:59 PM

Damn that had to have hurt to ride with.

This forum thread has 6 replies.

New thread Looks like Roczen wants to take it to the next level 10/10/2013 1:06 PM

This forum thread has 36 replies.

New thread RC bike on Craigslist 9/3/2013 12:11 PM

Thoughts...legit? $$$$? etc. http://inlandempire.craigslist.org/mcy/4021552012.html

This forum thread has 16 replies.

New thread RM 250 jetting specs for 7800ft 5/19/2013 1:11 PM

Does anyone have high altitude jetting specs for a late model RM 250? The track is Mammoth and altitude is 8000ft.. The bike is an 06 RM250 with PC pipe and silencer and V Force reeds. Thanks in advance.

This forum thread has 3 replies.

New thread SHOWA Twin Chamber Help 5/6/2013 12:13 PM

I have a set of twin chambers on the 06 RM 250 that I just bought. My issue is that there is no good way to adjust the compression since the screw is too close to the bars. I saw a sweet adjuster that attached through the bleed screw. The problem is ... more »

This forum thread has 5 replies.

New thread JS7 4/13/2013 8:36 PM

Oh My......... more »

This forum thread has 148 replies.

New thread KX 125 Fork Help 3/27/2013 9:40 AM

One of the guys at work wants to put the shorter front brake line with Honda style routing on his 98 KX125. Does anyone have any experience with what fork guard set up that this would require?

This forum thread has 2 replies.

New thread craigslist....enough said 3/15/2013 10:04 PM

http://sandiego.craigslist.org/csd/mcy/3676765944.html

This forum thread has 1 replies.