Added reply in a thread Jarvis tmx mods not on a ktm 11/7/2021 5:55 AM

All of that makes sense except for looping the overflow hose. And notching the slide is sketchy I definitely wouldn’t do that. I currently have my cyl, head, and carb at tmr getting done up by Tom Morgan. Next time I talk to him ill ask him and see if ... more »

Added reply in a thread Jarvis tmx mods not on a ktm 11/7/2021 5:31 AM

Interesting, so just a few holes and a looped carb line? Don't understand how any of those changes would make the tmx a easier carb. Definitely interested to hear what it does if you do decide to do it though

Added reply in a thread Jarvis tmx mods not on a ktm 11/6/2021 9:35 PM

Never heard of this before, if you decide to do it please post about it. As I also have a 07' rm125 and would love to know if it helps. what exactly are the mods? I quickly looked it up but didnt find too much

Added reply in a thread 2 stroke all of a sudden cutting out and seems to be running rich off the bottom. 11/6/2021 9:02 PM

Spark plug wires on the rm's seem to have issues. My 07' dealt with the same issues and it ended up being some corrosion on the plug cap along with a really loose wire. Now have a ft of wire in my bag and 10 some foot of wire in my box. Its super cheap ... more »

Added reply in a thread Engine build / technical tutorials series? 11/6/2021 8:58 PM

Would love to see that, would watch just to watch and learn. Love seeing the ways different people tackle engine builds

Added reply in a thread 1999 Suzuki RM 125 11/6/2021 8:54 PM

Mannnn I'm jealous of that 08' 250. My end goal is to have my 07' 125 and a 08 250, both final years here in the states. Great work on that 125, looks pretty sick. My only suggestions would be to get the ignition cover and clutch cover powder coated ... more »

Added reply in a thread 2007 rm125 done? Crashed 11/6/2021 8:40 PM

Yes sir, I love this thing. Def a fun first bike after dealing with quads, super twitchy and playful. With more then enough power, and is really a smooth shifter if you time everything right. only downside is this is going to be my main seat time bike

... more »
Added reply in a thread 2007 rm125 done? Crashed 11/6/2021 8:33 PM

No sadly not, the kick starter itself has to come off. As you can see the gear rides on the inside of the shaft. Has to come out the correct way

the kick starter pivot is steel, and the shaft is also steel. So its steel on steel contact, I'd ... more »
Liked a bike check 1994 Honda of Troy Cr250 11/6/2021 5:40 PM
1994 Honda of Troy Cr250
Liked a bike check Kawasaki KX250af sold 11/6/2021 5:39 PM
Kawasaki KX250af sold
Liked a bike check 2021.5 Husqvarna FC450 RS 11/6/2021 5:39 PM
2021.5 Husqvarna FC450 RS
Added reply in a thread 2007 rm125 done? Crashed 11/6/2021 5:32 PM

Tried to get the puller on it and couldn't. Any more ideas would be great, as I'm not sure what to do to get this thing off now

Added reply in a thread 2007 rm125 done? Crashed 11/5/2021 5:53 PM

The PB blaster goes though the splines and is still the yellowish clear that its meant to be. I think its either twisted splines or someone put a set screw in place? No idea why that would be done, I know OEM doesn't have a set screw so my vote is twisted ... more »

Added reply in a thread 2007 rm125 done? Crashed 11/5/2021 5:13 PM

It has sat with pb blaster for just over a week. Didnt do anything. Also hit it with the torch. Yet again nothing, it almost acts like there’s a set screw holding it on the shaft. Not sure. The bike had power loss at the very end and was acting VERY ... more »

Added reply in a thread 2007 rm125 done? Crashed 11/5/2021 5:07 PM

Yeah I already blasted it with pb blaster. Didnt do anything. I agree at this point to leave together the bottom end. Thanks

Added reply in a thread 2007 rm125 done? Crashed 11/4/2021 11:49 PM

For what its worth here's what was bouncing around in the fly wheel/ignition area. Looks like the bent sheet metal piece that holds on the clutch cable. Checked everything 20X comparing parts to the parts diagram for OEM parts and nothing was ... more »
Started new thread 2007 rm125 done? Crashed 11/4/2021 11:39 PM

Hey guys figured I'd post up a thread on rebuilding my 07' rm125, just recently got the bike and thought it had a motor failure but ended up being something bouncing around off the flywheel. Oh well, good excuse to build it lol. Will preface this by

... more »

This forum thread has 106 replies

Liked a bike check MT207 KX125 2004 Pro Circuit Replica 10/25/2021 5:17 AM
MT207 KX125 2004 Pro Circuit Replica
Liked a bike check 1995 HRC CR250R Replica: A Survivor From JAPAN 10/25/2021 5:13 AM
1995 HRC CR250R Replica: A Survivor From JAPAN
Added reply in a thread Parting out 2004 rm125 project 10/19/2021 9:51 PM

alright no worries, not worth looking for me at least. Ive been looking for an entire spare trans to backcut and ICF. appreciate the response though