12/06/16
From personal experience on a 05 YZ125. Put a hole in the left side case from a clutch push rod issue. Replaced just one half. This was done approximately 40hrs ago, no issues. You should be fine by just replacing one side.
I figured I'd chime in but i'll be upfront to say that I do not have any experience with a reflashed stock ECU. Input coming from having a 2016 yz450f and a 2019 yz250f. The GYTR tuner (similar platform as the new WiFi set up for your phone on the 2019-current) ... more »
Do you have any pictures of the seat base? Know hours/condition of the foam?
Sent you a PM cdoggy.
Interested in a brake pedal tip, 2 brake pivot bolts, and a set of seat bolts. Not sure if there will be enough available or not?
Any master cylinder from early 2000's and up ktm will work. Use the stock YZ line with the brembo banjo bolts on the MC. Part number 54813001200 is one of the more common ktm master cylinders used.
Thanks Paw Paw. I will get that all replaced. Am I overly paranoid now with a clip style master link failing or should I look into a rivit style master link as this is a common problem? I've never had a clip style failure before.
Had an issue with the clip style master link coming off my chain, chain let go, took out/mauled the case saver and got jammed against the case. In the process of inspecting it I found some oil running down the inside of the case. At first I thought the
This forum thread has 5 replies.
Silencer for the 250's have two mounts, the 125's only have one mount. As far as I know it has always been this way.
There are two types of power flow shrouds for the 14-17/18 YZF. One set does have the additional screen for the intake. https://cycra.com/product/cycra-powerflow-radiator-shrouds-with-extended-intake-debris-screen-yamaha-2014-16-yz250fx-wr250f-oem-blue/ ... more »
https://www.instagram.com/p/BrgJHRMg9Xt/ This is what the practice track is like currently. This is the track you are referring to as the "grass track". There has been a fair amount of rain in the area lately so they had the sand track open today according ... more »
"If Tomac gave MXGP a proper go, it would add that next level prestigious the series deserves." Its not about what the MXGP can do for Tomac, rather what Tomac can do for the MXGP? I believe there is a reason why an MXGP rider wanted to race a US national ... more »
What brand is everyone using for carbon fork covers for the outer fork tubes? I've seen P3, Pro Grip, and Light speed. Leaning towards light speed but interested to find who factory yamaha uses or if they are an in house/factory item. Going on newer ... more »
This forum thread has 5 replies.
What are the chances you would be interested in making a few of these spacers and/or what are the dimensions?
I am not up on the latest KTM stuff, but isn't the 2018 FE the new 450? I would say there is no factory edition 250 or 350 for 2018, the 2019 250 and 350 are "all new" and the 2019 450 would be the same as the 2018 factory edition. If your looking for ... more »
Looking for a lightly used motostuff brake caliper bracket. I was given a couple of motostuff 280mm rotors but no caliper bracket. I know they sell the bracket separately however I figured I would try here first. Not sure if my private message works ... more »
This forum thread has 0 replies.
I haven't personally rode an AER to SSS conversion but Cal at FTI in Thomasville has done SSS conversions and I've herd people say they were more than satisfied. Rider is around the 260-270lbs on a 450sxf. I have rode an AER on a 150sx that was re valved ... more »
Yes, I should have specified that I was pertaining to the blue one but it looks like everyone has them on back order.
Noticed the cycle trader team running a different style stadium plate. A little digging results in a new UFO stadium plate. I like how the brake line is made/routed behind the number plate. Anyone know who has them in stock, in the USA not Europe?
This forum thread has 4 replies.
