Added reply in a thread 94cr250 5/5/2018 11:02 AM

What?

Added a comment to On The Box's bike check 5/4/2018 7:35 PM
2003 Honda CR250R

Love the bike i recently purchased a 20p3 CR250R loving it so far. Any tips on good purchases to really improve the bike, so far i have fmf gold expandion chamber and fmf turbine core2 silencer. Thats it.

0 0 0

This setup has 5 comments.

Started new thread 94cr250 5/4/2018 7:30 PM

Ok so back to the 94cr we ended up buying a jd jet kit and used what they recommended which were the following. Main-175 pilot-55 and the rich needle at 2 from the top. Still had issues holding idle. Air screw was no help and would not idle with or without ... more »

This forum thread has 3 replies

Added reply in a thread 94 cr250r jets?? 4/14/2018 9:18 AM

If the bike is running rich and we have to turn the air screw way out.... why would I go smaller on the pilot correct me if I'm wrong but wouldn't make it worse.

Added reply in a thread 94 cr250r jets?? 4/13/2018 2:05 PM

So adjust the floats up more? Or different jets??

Started new thread 94 cr250r jets?? 4/13/2018 1:09 PM

So my brother owns a 94 cr250 bike wont idle.. we adjusted floats and it helped but refuse to go any higher. So what jets should i run we live at 4393' and average temps currently are 40 to 60 degrees. In order for the bike to idle whats so ever we had ... more »

This forum thread has 7 replies

Added reply in a thread HELP!! 94 CR250R 3/15/2018 11:21 AM

I will try it with the choke later today. Thank you i apreciate the serious response.

Added reply in a thread HELP!! 94 CR250R 3/15/2018 11:11 AM

Whats the best way to figure out if the silencer is clogged.. and sorry but have not been riding bikes for long, is the air screw the small brass flat head screw on bottom right of carb looking at it from left side of bike?

Added reply in a thread HELP!! 94 CR250R 3/15/2018 11:03 AM

Will do. Thank you sir.

Added reply in a thread HELP!! 94 CR250R 3/15/2018 11:00 AM

Thanks bud I appreciate the help.

Started new thread HELP!! 94 CR250R 3/15/2018 10:05 AM

My brother picked up a 94 cr250. The bike bogs in low rpms with no power but once we hit the power band the bike rips..

This forum thread has 27 replies

Added reply in a thread 03cr250 carb 3/15/2018 10:03 AM

I tried the float level fixed the leaking but started to run 2 lean so i adjusted back and bike ran better but continues to leak. So next i will order a rebuild kit and replace the oring

Started new thread 03cr250 carb 3/10/2018 10:12 PM

Hi im new to the sight! I bought a 03 cr250r, the bike seems to be tuned very well! Idles good and rips hard! But my overflow tube leaks out gas when the gas is turned on unless the bike is running and throttle is open to some degree.. wjat should i ... more »

This forum thread has 3 replies