Pro circuit B kit suspension cr/crf

CrGuy2T
Profile picture for user CrGuy2T
Posts
4183
Joined
3/11/2015
Location
Santa Fe, TX US
Fantasy
3711th
CrGuy2T
Edited Date/Time 7/8/2016 4:48pm
Brand new clamps 7/8's bar nounts only mounted on a bike that was never intended to be ridden. showa 47mm forks and Showa shock. The dlc on the shock shaft and forks are great. Hard ano on for lugs is in good shape. The forks are from the older 03 lugs with the longer brake caliper mount. The shock is a newer shock off an 08 crf. It has all the anodized lart with some wear. Set up for 180-195lb Mx.
1500
Robertmartin517@yahoo.com








|
CrGuy2T
Profile picture for user CrGuy2T
Posts
4183
Joined
3/11/2015
Location
Santa Fe, TX US
Fantasy
3711th
CrGuy2T 7/8/2016 7:04pm
7/8/2016 7:04pm
I believe so. I can't remember if it was 09 or 10 when all that changed. These are 47mm.
CrGuy2T
Profile picture for user CrGuy2T
Posts
4183
Joined
3/11/2015
Location
Santa Fe, TX US
Fantasy
3711th
CrGuy2T 7/8/2016 7:27pm
7/8/2016 7:27pm
Actually the shock and forks will work on an 09 crf 250. You would have to change the front brake carrier and axle. I have a spare of you want the stuff just email me. Thanks

The Shop

See All »
macz400
Profile picture for user macz400
Posts
1391
Joined
8/20/2013
Location
League City, TX US
macz400 7/8/2016 8:19pm
7/8/2016 8:19pm
09 crf450 48mm KYB
09 crf250 47mm showa
jeffro503
Profile picture for user jeffro503
Posts
27442
Joined
7/22/2007
Location
St Helens, OR US
jeffro503 7/10/2016 10:14am
7/10/2016 10:14am
Robert....me and you have spoke back and forth on email a few times....hope you keep me in mind if you ever run across a set of A-kit that'll fit my RM250. I seem to see quite a few sets roll through here for the Honda's and Kawi's....but I very rarely ever see anything for an RMZ or RM. Wonder why?
CrGuy2T
Profile picture for user CrGuy2T
Posts
4183
Joined
3/11/2015
Location
Santa Fe, TX US
Fantasy
3711th
CrGuy2T 7/10/2016 10:30am
7/10/2016 10:30am
CrGuy2T wrote:
Brand new clamps 7/8's bar nounts only mounted on a bike that was never intended to be ridden. showa 47mm forks and Showa shock. The dlc...
Brand new clamps 7/8's bar nounts only mounted on a bike that was never intended to be ridden. showa 47mm forks and Showa shock. The dlc on the shock shaft and forks are great. Hard ano on for lugs is in good shape. The forks are from the older 03 lugs with the longer brake caliper mount. The shock is a newer shock off an 08 crf. It has all the anodized lart with some wear. Set up for 180-195lb Mx.
1500
Robertmartin517@yahoo.com








I haven't seen any rm stuff in a while. I had a bunch of sets over the last 2 years. I don't see anything comming my way in the near future. I'm actually starting to veer in a different direction as far as bike builds and getting parts goes. if something comes up ill pm you.
jeffro503
Profile picture for user jeffro503
Posts
27442
Joined
7/22/2007
Location
St Helens, OR US
jeffro503 7/10/2016 10:43am
7/10/2016 10:43am
CrGuy2T wrote:
Brand new clamps 7/8's bar nounts only mounted on a bike that was never intended to be ridden. showa 47mm forks and Showa shock. The dlc...
Brand new clamps 7/8's bar nounts only mounted on a bike that was never intended to be ridden. showa 47mm forks and Showa shock. The dlc on the shock shaft and forks are great. Hard ano on for lugs is in good shape. The forks are from the older 03 lugs with the longer brake caliper mount. The shock is a newer shock off an 08 crf. It has all the anodized lart with some wear. Set up for 180-195lb Mx.
1500
Robertmartin517@yahoo.com








CrGuy2T wrote:
I haven't seen any rm stuff in a while. I had a bunch of sets over the last 2 years. I don't see anything comming my...
I haven't seen any rm stuff in a while. I had a bunch of sets over the last 2 years. I don't see anything comming my way in the near future. I'm actually starting to veer in a different direction as far as bike builds and getting parts goes. if something comes up ill pm you.
Thank you Robert! Talking to Shaun a little around the same time I was talking to you , it sounds like if I was to find a newer set of the RMZ kit suspension , I could get it to fit. Change out the bottom clevius on the shock to the correct size and basically slap on an RMZ front wheel , axel , correct triple clamps and so forth , and I would be good to go. The problem with it is....finding it....and then after I find it to actually have the spare money so I can buy it at the time. Thank you Robert!
CrGuy2T
Profile picture for user CrGuy2T
Posts
4183
Joined
3/11/2015
Location
Santa Fe, TX US
Fantasy
3711th
CrGuy2T 7/10/2016 10:49am
7/10/2016 10:49am
They will show up just be patient.
jeffro503
Profile picture for user jeffro503
Posts
27442
Joined
7/22/2007
Location
St Helens, OR US
jeffro503 7/10/2016 10:53am
7/10/2016 10:53am
CrGuy2T wrote:
They will show up just be patient.
I hope so. I decided to keep the 05' RM I was selling. So I'll have two of them bikes sitting here and want to show one of them some love.

Sorry brother...didn't want to hijack your thread here. Good luck with the sale!
CrGuy2T
Profile picture for user CrGuy2T
Posts
4183
Joined
3/11/2015
Location
Santa Fe, TX US
Fantasy
3711th
CrGuy2T 7/10/2016 11:23am
7/10/2016 11:23am
All good. I would put the kit on the 05. The reason being is the newer shock is a direct fit. You wouldn't have a clevis issue. Also all you have to do is bore your stock clamps. 04 and back is where the clevis issu comes into play. They had a shorter clevis.
jeffro503
Profile picture for user jeffro503
Posts
27442
Joined
7/22/2007
Location
St Helens, OR US
jeffro503 7/10/2016 11:36am
7/10/2016 11:36am
CrGuy2T wrote:
All good. I would put the kit on the 05. The reason being is the newer shock is a direct fit. You wouldn't have a clevis...
All good. I would put the kit on the 05. The reason being is the newer shock is a direct fit. You wouldn't have a clevis issue. Also all you have to do is bore your stock clamps. 04 and back is where the clevis issu comes into play. They had a shorter clevis.
Aren't the 05' and 06' shock exactly the same? I was thinking they were? And good to know about boring my clamps. I have a set of the "impossible to find " RG3 upper clamps and that would save a huge headache right there.
Tracktor
Profile picture for user Tracktor
Posts
2344
Joined
8/17/2006
Location
The RTF/Amboy, WA US
Tracktor 7/12/2016 4:33pm
7/12/2016 4:33pm
Would these work on an '02 CR125?..............Thanks
CrGuy2T
Profile picture for user CrGuy2T
Posts
4183
Joined
3/11/2015
Location
Santa Fe, TX US
Fantasy
3711th
CrGuy2T 7/12/2016 5:10pm
7/12/2016 5:10pm
Tracktor wrote:
Would these work on an '02 CR125?..............Thanks
Yes
jason486
Profile picture for user jason486
Posts
487
Joined
12/6/2014
Location
Corona, CA US
Fantasy
1542nd
jason486 7/12/2016 8:09pm
7/12/2016 8:09pm
Are the clamps for sale separate?
CrGuy2T
Profile picture for user CrGuy2T
Posts
4183
Joined
3/11/2015
Location
Santa Fe, TX US
Fantasy
3711th
CrGuy2T 7/12/2016 8:29pm
7/12/2016 8:29pm
Possible but it'll be better to buy the set.
jason486
Profile picture for user jason486
Posts
487
Joined
12/6/2014
Location
Corona, CA US
Fantasy
1542nd
jason486 7/12/2016 10:08pm
7/12/2016 10:08pm
CrGuy2T wrote:
Possible but it'll be better to buy the set.
If you sell them separate what kinda price you thinking? I don't have 1500 to drop on suspension right now

Pit Row

See All »
CrGuy2T
Profile picture for user CrGuy2T
Posts
4183
Joined
3/11/2015
Location
Santa Fe, TX US
Fantasy
3711th
CrGuy2T 7/12/2016 10:38pm
7/12/2016 10:38pm
Gonna be in the 6-650 range.
Tracktor
Profile picture for user Tracktor
Posts
2344
Joined
8/17/2006
Location
The RTF/Amboy, WA US
Tracktor 7/13/2016 10:33am
7/13/2016 10:33am
Tracktor wrote:
Would these work on an '02 CR125?..............Thanks
CrGuy2T wrote:
Yes
Emailed you............
Tracktor
Profile picture for user Tracktor
Posts
2344
Joined
8/17/2006
Location
The RTF/Amboy, WA US
Tracktor 7/27/2016 9:53am
7/27/2016 9:53am
Great seller! Shipped quickly & setup was exactly as described. Work great just got to spring them a bit lighter for my boy..............Thanks again........
CrGuy2T
Profile picture for user CrGuy2T
Posts
4183
Joined
3/11/2015
Location
Santa Fe, TX US
Fantasy
3711th
CrGuy2T 7/27/2016 2:10pm
7/27/2016 2:10pm
Glad you like the kit. I figured the spring rate would be a little stiff.

Post a reply to: Pro circuit B kit suspension cr/crf