KTM Clutch Slave Problem

CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7358
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
Fantasy
2339th
CarlinoJoeVideo
Edited Date/Time 6/21/2017 9:33pm
Hey guys, my o ring on my clutch save piston broke and pretty much melted over time. It's on a 2016 250sxf.

I randomly had an oring that works and seems to be holding. But would be cool to have a backup. KTM doesn't sell a rebuild kit any more or break down the Piston parts online.

Anyone have experience finding one for this fit?

Thanks!
|
Bruce372
Profile picture for user Bruce372
Posts
6341
Joined
4/1/2008
Location
US
Bruce372 6/19/2017 11:53pm
6/19/2017 11:53pm
Does the parts fiche have the size ? Honda do for suspension and I bought the high end ones from eBay from those measurements
Lynch
Profile picture for user Lynch
Posts
722
Joined
3/14/2015
Location
SE
Lynch 6/20/2017 12:26am
6/20/2017 12:26am
Are you sure you can't just buy the o ring itself? Atlest I can here in Sweden from a KTM dealer.
CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7358
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
Fantasy
2339th
CarlinoJoeVideo 6/20/2017 6:14am
6/20/2017 6:14am Edited Date/Time 6/20/2017 6:15am
So here's the diagram posted below. Inside the actual slave(part 27) there's a Piston and oring. They don't sell what alone. That's the oring that broke.

It's not a big deal, just looking for a back up so I don't have to buy a $150 slave because the $2 oring broke. Weird situation.

The Shop

See All »
swatdoc
Profile picture for user swatdoc
Posts
1083
Joined
6/29/2014
Location
Temecula, CA US
swatdoc 6/21/2017 8:34pm
6/21/2017 8:34pm
Joe - Rekluse includes a replacement oring with their EXP kits, which has a replacement slave. I'm sure you could buy one from them.
CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7358
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
Fantasy
2339th
CarlinoJoeVideo 6/21/2017 9:33pm
6/21/2017 9:33pm
TrailDigger wrote:
Call a dealership and they should be able to give you the size.
I tried and they don't have any info on it either. I'll check out the Rekluse option or maybe just get a slave off eBay...
Paw Paw
Profile picture for user Paw Paw
Posts
679
Joined
12/24/2011
Location
Benton, LA US
Paw Paw 6/23/2017 6:22am
6/23/2017 6:22am
Why not just go to Harbor Freight and buy the complete set of Metric O-rings for a few dollars. I have found that almost every size of metric o-ring I have needed to be included.

Paw Paw
CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7358
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
Fantasy
2339th
CarlinoJoeVideo 6/23/2017 8:47am
6/23/2017 8:47am
Paw Paw wrote:
Why not just go to Harbor Freight and buy the complete set of Metric O-rings for a few dollars. I have found that almost every size...
Why not just go to Harbor Freight and buy the complete set of Metric O-rings for a few dollars. I have found that almost every size of metric o-ring I have needed to be included.

Paw Paw
I tried that, metric and standard. They are too thick.

Post a reply to: KTM Clutch Slave Problem