trouble getting bike into neutral

tasco
Posts
46
Joined
4/26/2014
Location
Swannanoa, NC US
10/17/2014 11:04pm Edited Date/Time 10/18/2014 12:40pm
Hey guys, I just bought a used 2003 kx125. The bike is in decent shape, but I am having trouble getting the bike into neutral. When I do manage to it into neutral its going from 2nd down. Instead of 1st then up into neutral. I was also having a little oil seeping out of the clutch cover. As I was removing the cover to replace the gasket I noticed grooves on the bottum of the clutch cover from the clutch pressure plate scrapping against it. I also noticed the shifter has scrapped against the left side cover. I'm not too familiar with the inner workings of a dirtbike, and was hoping someone here could give me some suggestions on what to look for to try and fix this.
|
fiveseven
Posts
33
Joined
5/4/2011
Location
raufoss NO
10/18/2014 6:37am
If it is when your bike is running, the clutch would be likely. Bad basket might make stuck a little. I
tasco
Posts
46
Joined
4/26/2014
Location
Swannanoa, NC US
10/18/2014 7:55am
Its the same with the bike running and not running.
Matt Fisher
Posts
3947
Joined
4/1/2008
Location
Visalia, CA US
Fantasy
1084th
10/18/2014 12:40pm
If it's the same running or not, then it's probably a combination of the clutch basket and the shift drum cam having rounded edges on it. Make sure the shifter is no longer contacting the case and that the clutch basket isn't somehow touching the inside of the case.

Post a reply to: trouble getting bike into neutral

The Latest