Posts
361
Joined
1/22/2015
Location
houston, TX
US
Edited Date/Time
1/19/2016 2:55am
Thought I'd share a little build I have going on .
11 yz250 . Started the build because I broke the left case from a chain snapping and putting a small hole at the clutch rod actuator . I fixed it for a few months with some Jb welb but it couldn't last any longer .
Going from the frame up with new everything in the motor as well as all the bling and going to make it into the 2015 body work .
Top and bottom end OEM rebuilds .
New cases
Pc head and cylinder
New full hinson clutch
The motor will be dialed in thats for sure !
here's a little teaser of the build so far
And the bike before the rebuild
11 yz250 . Started the build because I broke the left case from a chain snapping and putting a small hole at the clutch rod actuator . I fixed it for a few months with some Jb welb but it couldn't last any longer .
Going from the frame up with new everything in the motor as well as all the bling and going to make it into the 2015 body work .
Top and bottom end OEM rebuilds .
New cases
Pc head and cylinder
New full hinson clutch
The motor will be dialed in thats for sure !
here's a little teaser of the build so far
And the bike before the rebuild
The Shop
hopefully this hard coat anodize will be as long lasting as they say
Radiators aluminum acid washed .
Pipe wire brushed and scotch Brite. I've never re tempered the welds to bring the blue back around the welds but Ill give that a shot later .
Will a normal propane bottle with torch end work ?
and a few small bling parts
yzf Footpegs , which are probally going to be the best addition for actual feel .
put the radiators on, assembled and cleaned the carb , new v force reeds .
And put a vortex ignition on , really hoping it helps with over rev like my motor guy says
Anyone seen a carbon fiber ignition cover? I'd hate go put a Boyesen cover on and have v force reeds
http://www.waveracing.com/html/carbon_fiber.html
Pit Row
New plastics etcc to make it into a 15 body work
Blue tm designs chain guide n slide kit
New bolts for the exterior
And of course more bling parts
Www.splitdesigns.com
Shoot me a dm pcp if your interested we can work somethin out
Post a reply to: Yz 2 stroke build .FINISHED(for now)