Posts
721
Joined
4/1/2008
Location
Peterborough, On
CA
Edited Date/Time
3/23/2015 7:48am
So I just bought an 09 RMZ 450 and it is in stock form as far as I can see, my questions are:
#1- under the front # plate is a piece of duct tape labeled map#2. So what does that mapping indicate?
#2- the fork tubes are black which I don't believe to be factory?
unfortunately I bought this bike from a shop and didn't get any history on the bike.
#1- under the front # plate is a piece of duct tape labeled map#2. So what does that mapping indicate?
#2- the fork tubes are black which I don't believe to be factory?
unfortunately I bought this bike from a shop and didn't get any history on the bike.
Most likely stock forks painted.
Paw Paw
The Shop
The forks are coated (probably DLC coating like Kawi's come with stock?). Are the suspension companies logos still on the bike? Might be able to contact them for information on what all was done.
RG3
But here is the bike.
It will just be a plug in coupler with a single wire running from one socket to another in any case if it is there.
Paw Paw
Pit Row
Post a reply to: RMZ 450 mapping and fork questions