Upgrade to enjoy this feature!
Vital MX fantasy is free to play, but paid users have great benefits. Paid member benefits:
- View and download rider stats
- Pick trends
- Create a private league
- And more!
Only $10 for all 2024 SX, MX, and SMX series (regularly $30).
I also noticed that the throttle stop doesn't stop it rotating forward after a while, I noticed it after I started my bike on the stand and it was running horrible, went to give it a bit of throttle and it was stuck, gave it a firm twist and it sort of snapped free, It only happens when the tube is pushed inward toward the centre of the bars and rotated forward. I must have done it while I was starting it and not noticed, The OEM tube doesn't do this, ever since then my bike shuts off as soon as I move it, and now I have to take it to the dealer to get it diagnosed, may have damaged the Throttle Position Sensor...
The Shop
But like I said, before I did this today I couldn't even get it of the stand without it conking out so I feel like I'm going in the right direction.
Either way my bike wouldn't ride with the Emig grip on it and as soon as i put the standard tube in and adjusted the throttle cable back to normal it all of a sudden runs fine.... well except for stalling when i mash the front brakes....
You can see here its worn grooves into it from the two little stoppers in the housing.
The other cams included with the grips were thicker, comparable to the OEM thickness, but were for other models, according to the application guide.
Post a reply to: I guess the ODI / Emig grips don't fit all?