2001 RM250 crank width?

southwick_mx
Edited Date/Time 3/4/2015 9:38am
Hi!

Does anyone have the service manual for a 2001 RM250? I would very much like to know the assembled width web-to-web.
I'm about to rebuild an OEM crank using a Pro-x conrod kit, but I don't have the manual for the bike.

Manual says 60.00mm + - 0.05mm for my 2005 crank, but the older one is a bit different, so please help me out.

Cheers/

Lasse
|
tzmike
Profile picture for user tzmike
Posts
444
Joined
2/22/2014
Location
Warwick, NY US
tzmike 3/3/2015 11:03am
3/3/2015 11:03am
you use the crank pin length. It sits FLUSH in each web. Thats your width.
southwick_mx 3/3/2015 11:11pm
3/3/2015 11:11pm
Hi!

Yes, in this case you're correct, 58.00mm was the golden number. Don't know if the width is always the same as the crankpin lenght..? Would be convenient, though!

Thanks/

Lasse





krgperformance
Profile picture for user krgperformance
Posts
52
Joined
1/29/2013
Location
Sterling Heights, MI US
krgperformance 3/4/2015 9:38am
3/4/2015 9:38am
shouldnt matter long as pin flush on each web and your feeler gauge fit with your rod should be fine

Post a reply to: 2001 RM250 crank width?