2000 cr250 plastic ?

slatermx
Posts
91
Joined
2/1/2014
Location
Hemet, CA US
4/23/2014 2:08pm Edited Date/Time 4/23/2014 2:48pm
Do they make updated plastics for them and were would I find some
|
thormx11
Posts
187
Joined
12/2/2013
Location
Pembroke, KY US
4/23/2014 2:12pm
I believe really the only update you could do is replace the front fender with a 09-12 450f fender and get a matching Cyrca number plate for it, real easy to do.

I don't believe anybody has any new style plastics that will just bolt right up, I have been looking for some for my '02 and haven't found any, was only able to do the front fender/number plate conversion.
slatermx
Posts
91
Joined
2/1/2014
Location
Hemet, CA US
4/23/2014 2:27pm
thormx11 wrote:
I believe really the only update you could do is replace the front fender with a 09-12 450f fender and get a matching Cyrca number plate...
I believe really the only update you could do is replace the front fender with a 09-12 450f fender and get a matching Cyrca number plate for it, real easy to do.

I don't believe anybody has any new style plastics that will just bolt right up, I have been looking for some for my '02 and haven't found any, was only able to do the front fender/number plate conversion.
Do they come pre drilled
thormx11
Posts
187
Joined
12/2/2013
Location
Pembroke, KY US
4/23/2014 2:48pm
No, I believe it is the same as it was on my 02, 2 of the holes for the front fender line up but you have to drill the other 2 holes for all 4 to line up, and the front number plate is only held on by zip ties. There is one bolt about center towards the top of the number plate on the '00 model, and there isnt a hole for it on the 09-12 Cyrca plate, I don't think you have to have this bolt but I went ahead and drilled it so I could put a bolt in it.

Post a reply to: 2000 cr250 plastic ?

The Latest