05 rm250 powervalve question

DTHA70
Profile picture for user DTHA70
Posts
336
Joined
9/25/2008
Location
Surprise, AZ US
DTHA70 4/22/2014 9:24am
4/22/2014 9:24am
i used a 90* steel hose fitting from the hardware store and tapped the hole to match it, use loctite 247 tape and call it a day. has to be a short nipple on the 90 degree fitting though so you can tighten it without hitting the aluminum PV housing
mgtkr1
Profile picture for user mgtkr1
Posts
126
Joined
4/18/2014
Location
GB
mgtkr1 4/22/2014 9:39am
4/22/2014 9:39am
tbh I may do that next time I have the barrel off for a fresh piston/rings as I don't want swarf getting into the powervalve chamber.

Post a reply to: 05 rm250 powervalve question