03 rm 125

tylernowlin285
Edited Date/Time 11/18/2014 8:20am
I recently bought a 2003 RM 125 to make a project bike that was in pretty bad shape and missing some parts. I got an amazing deal so i couldn't turn that down, but upon tearing it down i found it had no exhaust valves ( i got this bike for $350 so dont hate! lol ) I looked on eBay and cannot find any, and Rocky Mountain and Motorsport do not sell them anymore. So i am hoping someone on here could help me track some down!

Thanks!
|
Ktm life
Profile picture for user Ktm life
Posts
167
Joined
12/17/2012
Location
Tremonton, UT US
Ktm life 11/13/2014 7:08pm
11/13/2014 7:08pm
Check out millennium technologies, theyhave cylinders in stock they might have some power valves as well
Matt Fisher
Profile picture for user Matt Fisher
Posts
3948
Joined
4/1/2008
Location
Visalia, CA US
Fantasy
1177th
Matt Fisher 11/14/2014 7:27am
11/14/2014 7:27am
Will a cylinder from a 02 RM125 fit? I have one complete with power valve.
LilZebb
Profile picture for user LilZebb
Posts
196
Joined
1/22/2012
Location
Henderson, NV US
LilZebb 11/16/2014 10:24am
11/16/2014 10:24am
Do you know what K model it is? Because I also had to find a new powervalve for mine and knowing which model it was helped a ton. I'd try ebay if anything first.

The Shop

See All »
RyanLester761
Profile picture for user RyanLester761
Posts
1133
Joined
2/7/2007
Location
El Dorado Hills, CA US
RyanLester761 11/17/2014 7:28pm
11/17/2014 7:28pm
I would keep an eye out for a complete cylinder on eBay too.

Side note: Don't use a Wiseco crankshaft if you rebuild the bottom end. I learned the hard way and wished I knew before. I will swallow my pride and pass on the info.
Cancerman
Profile picture for user Cancerman
Posts
756
Joined
7/16/2011
Location
In Hell, FL US
Cancerman 11/17/2014 8:24pm
11/17/2014 8:24pm
RyanLester761 wrote:
I would keep an eye out for a complete cylinder on eBay too. Side note: Don't use a Wiseco crankshaft if you rebuild the bottom end...
I would keep an eye out for a complete cylinder on eBay too.

Side note: Don't use a Wiseco crankshaft if you rebuild the bottom end. I learned the hard way and wished I knew before. I will swallow my pride and pass on the info.
My Wiseco Crank has been doing fine, going on 2 years now. Of course I run Maxima oil with 110 race gas.
slipdog
Profile picture for user slipdog
Posts
10044
Joined
7/25/2009
Location
Nor Cal, CA US
slipdog 11/17/2014 8:35pm
11/17/2014 8:35pm Edited Date/Time 11/17/2014 8:36pm
Some people have gone over Niagara Falls in a bucket and actually lived to tell about it also. I ain't going over the falls!
seth505
Profile picture for user seth505
Posts
9374
Joined
4/1/2008
Location
SD, CA US
Fantasy
1271st
seth505 11/18/2014 7:01am
11/18/2014 7:01am
RyanLester761 wrote:
I would keep an eye out for a complete cylinder on eBay too. Side note: Don't use a Wiseco crankshaft if you rebuild the bottom end...
I would keep an eye out for a complete cylinder on eBay too.

Side note: Don't use a Wiseco crankshaft if you rebuild the bottom end. I learned the hard way and wished I knew before. I will swallow my pride and pass on the info.
x2
Jakes Dad
Profile picture for user Jakes Dad
Posts
1865
Joined
6/22/2009
Location
Brooksville, FL US
Jakes Dad 11/18/2014 7:35am
11/18/2014 7:35am
I have a 144 cylinder with head in good shape. $350 if you are interested, complete powervalve already installed. I can upload pics here if you want.
tylernowlin285 11/18/2014 7:52am
11/18/2014 7:52am
Jakes Dad wrote:
I have a 144 cylinder with head in good shape. $350 if you are interested, complete powervalve already installed. I can upload pics here if you...
I have a 144 cylinder with head in good shape. $350 if you are interested, complete powervalve already installed. I can upload pics here if you want.
What year is it off of?
slipdog
Profile picture for user slipdog
Posts
10044
Joined
7/25/2009
Location
Nor Cal, CA US
slipdog 11/18/2014 8:20am
11/18/2014 8:20am
Jakes Dad wrote:
I have a 144 cylinder with head in good shape. $350 if you are interested, complete powervalve already installed. I can upload pics here if you...
I have a 144 cylinder with head in good shape. $350 if you are interested, complete powervalve already installed. I can upload pics here if you want.
That's a damn good deal!

Post a reply to: 03 rm 125