Posts
5572
Joined
3/28/2012
Location
TN
US
Edited Date/Time
9/23/2014 3:55pm
Just got a call from Suzuki about a recall on the front brake master cylinder on the '09 GSX-R1000 I had. Not sure what all models this recall pertains to, just wanted to pass it along to anyone who may have a similar model. They didn't specifically say "GSXR1000" just "GSXR" so 600s and 750s may be affected as well. Just decided to pass it on in case anyone might have bought one used and didn't receive the call.
SUBJECT: Safety Recal Campaign — FRONT BRAKE MASTER CYLINDER
MODELS: 2004-2013 GSX-R600
2004-2013 GSX-R750
2005-2013 GSX-R1000
What is the problem?
After a long-term service life of the motorcycle without changing the brake fluid, the brake fluid can deteriorate
and absorb moisture. The brake piston inside the front brake master cylinder of some motorcycles may not have
uniform surface treatment. This combination of conditions can lead to corrosion of the brake piston. Corrosion of
the brake piston generates gas, which may not be adequately purged from the master cylinder due to the side
position location of the reservoir port. Gas remaining in the master cylinder can affect braking power by reducing
proper fluid pressure transmission to the front brake. Over time, as gas continues to slowly accumulate above
the reservoir port, the front brake lever may develop a “spongy” feel and stopping distances may be extended,
increasing the risk of a crash.
Affected Units:
Model Model Year VIN Range
GSX-R600 2004-2013 ALL
GSX-R750 2004-2013 ALL
GSX-R1000 2005-2013 ALL
Post a reply to: ATTN: Suzuki GSXR Owners