Posts
9
Joined
11/5/2015
Location
AU
Edited Date/Time
11/29/2015 12:43pm
Hi ALL I have a 07 crfx and the wiring at the dash shorted out nd blew the fuse. I didn't know where the break was till I got home .. in that time it fries the dash.
I wired up 2008 speedo facomsa brand and it's been working up until last night I had my rear break light wires touch my exhaust and melted. . I replaced fuse and e erything is good except it does not show me speed.. I have checked all wiring and have checked my speedo drive ...
I wired up 2008 speedo facomsa brand and it's been working up until last night I had my rear break light wires touch my exhaust and melted. . I replaced fuse and e erything is good except it does not show me speed.. I have checked all wiring and have checked my speedo drive ...
All I can offer is I had a roadbike that had a similar problem but with the tach.
Found that one short smoked a wire in another spot causing a ground against frame.
Look everything over well. Including melted connectors inside the connectors as well.
The Shop
A rear brake light? WTF?
C'mon guys, let's get serious...
It is off-road only (unless you make some "mods").
I cut the plug for speedo drive and wired them up as the plug was kind of broken. .. speedo was working then it wasn't. . I now swapped the plug around and it started showing my speed except saying j was doing 189 and 20kmh so something isn't right... does anyone have any dash they are willing to sell... I'm sick of having drama
Maybe test it on a buddies bike?
Post a reply to: speedo dash stopped showing speed...