Yz250 jets?

2/8/2016 5:26pm Edited Date/Time 2/9/2016 4:33pm
I treated my self to a 2015 yz250 chucked on the vforce reeds and fmf expansion chamber and muffler... Proble is my bikes running rich and I need to rejett the bike has any one done this befor and if so what size jet did you replace it with??? I'm running my fuel 40:1
|
riggedfmx
Posts
43
Joined
2/24/2013
Location
TomsRiver, NJ US
2/8/2016 6:10pm
I'm curious as well. I just picked up a 15 yz250 with a pro circuit pipe and silencer as far as I know it hasn't been rejected. It runs on straight c12. If I got vforce would I need to rejet it?
2/8/2016 6:30pm
98 premium.. Yeah because with the pipe and reeds your change the air flow in and out of the engine putting the fuel mix out of wack
Premix
Posts
1514
Joined
1/5/2014
Location
AS US
2/9/2016 3:56pm
Needle all the way down, 48 or 45 pilot, 165-170 main is what I think I ran last year. 110/93 50:50 32:1 927.

The Shop

Hcallz5
Posts
2821
Joined
8/20/2013
Location
UT US
2/9/2016 4:24pm
Pickup a NECJ needle for a Suzuki
Jakes Dad
Posts
1865
Joined
6/22/2009
Location
Brooksville, FL US
2/9/2016 4:27pm
You're on the other side of the world in an entirely different season, can't think that hard right now. But start leaning on the needle 1st. I think I have the NECJ needle in Jake's bike at 2nd from top right now with a 178 for the cool weather here right now. Run 100LL with Motul 800T at 32 to 1.
Evoracer
Posts
263
Joined
12/12/2013
Location
Anaheim, CA US
2/9/2016 4:33pm Edited Date/Time 2/10/2016 8:22am
There is a whole thread on TT. Start with a #8 slide, work on the rest from there. imo

Check the timing thread as well...

Post a reply to: Yz250 jets?

The Latest