Plastics companies

TYLER_ROCHA
Profile picture for user TYLER_ROCHA
Posts
7
Joined
4/3/2017
Location
Dracut, MA US
TYLER_ROCHA
So I'm building my 14' honda , and I've been looking all over but can't find a definite answer, who currently makes good plastics UFO, or acerbis is what I narrowed it down too , need advice

|
-MAVERICK-
Profile picture for user -MAVERICK-
Posts
50384
Joined
3/26/2015
Location
Ontario CA
Fantasy
3730th
-MAVERICK- 4/3/2017 5:19pm
4/3/2017 5:19pm
OEM but it's more expensive.

We've always had good luck with UFO. I can't speak for Acerbis or any other brand as we've always used UFO. I'm not sure who makes the plastic for Honda but I believe Acerbis are the ones that do them for KTM.
TYLER_ROCHA
Profile picture for user TYLER_ROCHA
Posts
7
Joined
4/3/2017
Location
Dracut, MA US
TYLER_ROCHA 4/3/2017 5:22pm
4/3/2017 5:22pm
Oem front fender already is bought , going for an all red scheme , it's my 17' value brand crf lol
nascarnate326 4/3/2017 5:38pm
4/3/2017 5:38pm
I have Acerbis but seeing how you already have a fmf single I would say get UFO since they make the thin left side panel. I did my own 17 value edition out of a 2014 CRF 250 and it turned out great. This was yesterday.




davidgrip
Profile picture for user davidgrip
Posts
273
Joined
10/7/2011
Location
Indianapolis, IN US
davidgrip 4/3/2017 5:43pm
4/3/2017 5:43pm
Acerbis. Excellent Fit and Great Durability. I have run multiple seasons on 1 set. They also have the full Red for your Honda.
David
774 Kawasaki KX450F
Factory Backing
Factory Seat
Acerbis
Dunlop
MX Engine Stand
Matrix Concepts

The Shop

See All »
BobPA
Profile picture for user BobPA
Posts
8027
Joined
10/31/2013
Location
PA US
BobPA 4/3/2017 5:51pm
4/3/2017 5:51pm
A-chair-bees is the way to go
Bman_145
Profile picture for user Bman_145
Posts
867
Joined
12/30/2015
Location
Nor Cal, CA US
Bman_145 4/3/2017 7:22pm
4/3/2017 7:22pm
Im a UFO guy. I never liked that Acerbis had their name molded into the plastic where it was visible. I know its not on every piece, but it was enough to put me off.
kzizok
Profile picture for user kzizok
Posts
8393
Joined
10/19/2010
Location
AS US
Fantasy
2034th
kzizok 4/3/2017 8:28pm
4/3/2017 8:28pm
FWIW, Maier has a lot of experience with Honda plastic. I know, because I had sole ownership of a lot of Honda molds that I sent to them to manufacture for me to sell. I dont know if they are still heavy in Honda plastic, but they were very good at maintaining high specs at one time. Could be worth at least looking into.
RF219
Profile picture for user RF219
Posts
210
Joined
4/1/2008
Location
US
RF219 4/3/2017 8:47pm
4/3/2017 8:47pm
nascarnate326 wrote:
I have Acerbis but seeing how you already have a fmf single I would say get UFO since they make the thin left side panel. I...
I have Acerbis but seeing how you already have a fmf single I would say get UFO since they make the thin left side panel. I did my own 17 value edition out of a 2014 CRF 250 and it turned out great. This was yesterday.




I like the all black chain on your bike. What brand is it?
nascarnate326 4/5/2017 2:43am
4/5/2017 2:43am
nascarnate326 wrote:
I have Acerbis but seeing how you already have a fmf single I would say get UFO since they make the thin left side panel. I...
I have Acerbis but seeing how you already have a fmf single I would say get UFO since they make the thin left side panel. I did my own 17 value edition out of a 2014 CRF 250 and it turned out great. This was yesterday.




RF219 wrote:
I like the all black chain on your bike. What brand is it?
I believe it's a standard did520 that's been roached. I will be replaced at some point this year.

Tusk makes great o ring chains if you are in the market
DRAGONBACK 4/5/2017 3:08am
4/5/2017 3:08am
Very happy with Polisport. Perfect fit, great durability, fair price.
KTM OEM.
wfo250
Profile picture for user wfo250
Posts
63
Joined
11/3/2011
Location
Champaign, IL US
wfo250 4/5/2017 6:13am
4/5/2017 6:13am
TYLER_ROCHA wrote:
So I'm building my 14' honda , and I've been looking all over but can't find a definite answer, who currently makes good plastics UFO, or...
So I'm building my 14' honda , and I've been looking all over but can't find a definite answer, who currently makes good plastics UFO, or acerbis is what I narrowed it down too , need advice

UFO front number plates suck, Acerbis is like stock.

Post a reply to: Plastics companies