Pro Circuit Showa A Kit SFF Twin Chamber

711mx
Posts
40
Joined
12/22/2013
Location
GB
Hi Guys,

I have a set of Showa A Kit, direct from Pro Circuit off a 2013 KXF 250.

These were used to test in 2013 and have been stored ever since. There are some marks on the shock body from storage but does not affect performance and are only superficial and look worse on the photo than they are. These also have the turquoise coating on Forks and Shock. Have recently been serviced ready for sale.

Excellent set of suspension for someone, and will fit 2013-2017 with some small modification required for the later ones. In the UK but can do a deal for shipping worldwide. More pics available on request.

Completely open to offers, although i would like to see between $3000-$4,000.

I also have a lot of RMZ 450 spares. Including 2 x Rekluse clutches full, STM Factory Slipper clutch, 2 x vortex X10s, carbon parts, DEP quickshifter, Magura Hdraulic Clutch and much much more. Will be posting a full list tonight with prices.



|
711mx
Posts
40
Joined
12/22/2013
Location
GB
1/4/2017 6:05am
No clamps, but there were some ride engineering ones for $122 on eBay depending on what year they are going on
711mx
Posts
40
Joined
12/22/2013
Location
GB
1/4/2017 1:09pm
I am open to offers as previously mentioned, these are far too good to sit in my workshop any longer

The Shop

BML139
Posts
399
Joined
11/6/2013
Location
Gansevoort, NY US
1/4/2017 3:32pm Edited Date/Time 1/4/2017 3:34pm
What about the front axle? I believe with the lower lugs you have, you need to have a special axle from pro circuit to fit. I heard its costly to get
mjr119
Posts
864
Joined
4/1/2008
Location
US
1/4/2017 3:36pm
Correct on the axle. I got my axles mixed up and it wouldn't go thru the lug
jhansen510
Posts
2395
Joined
2/10/2009
Location
GREENFIELD, MN US
Fantasy
3600th
1/5/2017 9:44am
I have twin chamber spring pro circuit a Kit and I can use OEM front axle. Anyone know why this one requires the custom ti axle?
BML139
Posts
399
Joined
11/6/2013
Location
Gansevoort, NY US
1/5/2017 9:59am
jhansen510 wrote:
I have twin chamber spring pro circuit a Kit and I can use OEM front axle. Anyone know why this one requires the custom ti axle?
I think the gold lugs require the larger axle. I'm not sure ? Are your lugs gold.
711mx
Posts
40
Joined
12/22/2013
Location
GB
1/6/2017 10:48am
Just checked with pro circuit, the axle kit is $199.99 and is in stock

Post a reply to: Pro Circuit Showa A Kit SFF Twin Chamber

The Latest