Posts
92
Joined
5/18/2017
Location
Homestead, PA
US
Edited Date/Time
7/5/2017 2:12pm
I have a used but in great shape rear swingarm and linkage for a 1989 Suzuki RM250. The bearings and all seals are still within the linkage but all have been removed from the swingarm pivot point. There are NO CRACKS whatsoever on this arm! A few minor scuffs but it certainly doesn't appear the swingarm was ever raced. No dents or holes otherwise. Part cleaned up greatly and would look good on any bike it's installed on. $80
It's off an 89 RM250 and these also fit up to a 1992 RM250. http://www.partzilla.com/parts/detail/suzuki/SP-61000-28C31.html
No pivot bolt or chain tighteners/guides are included. What you see in the pics is what you get. These items for these older bikes are becoming harder and harder to locate in such good condition.
It's off an 89 RM250 and these also fit up to a 1992 RM250. http://www.partzilla.com/parts/detail/suzuki/SP-61000-28C31.html
No pivot bolt or chain tighteners/guides are included. What you see in the pics is what you get. These items for these older bikes are becoming harder and harder to locate in such good condition.
Any chance you could get some close up pictures of the rear axle slots?
Post a reply to: 1989-1992 Suzuki RM250 Rear Swingarm