Added reply in a thread 2016 WP A-Kit Cone Valve 48 Forks - New Design 2/13/2016 6:45 PM

What's the word Captain Cone Valve ?

Added reply in a thread New factory showa hybrid fork 2/7/2016 12:56 PM

I have had a hybrid fork setup on my Honda 450 for over 3 months now and it has a very nice feel to it. It consists of the original KYB PSF1 on the left and a KYB spring fork on the right using a YZ450 cartridge and everything matched up for correct ... more »

Added reply in a thread How many factory guys running air forks? 2/6/2016 1:28 PM

It is 22mm same as the bottom plug, Motion Pro have a tool for it

Added reply in a thread 2015 ktm 350 sxf forks. 2/3/2016 12:19 PM

For your weight you need .48kg or stock fork springs and stock shock spring as well. When the springs are too soft for your weight the suspension rides low in the stroke and that is why it feels harsh. The 4CS forks that are on your bike are not the ... more »

Liked a comment on the item New Halfpipe At Hangtown - What Do You Think? 5/13/2015 1:25 PM

Hell yea that is sick, but it should be mandatory to at least throw a 180 turn down each lap.

Added reply in a thread Lowering fork oil 4/20/2015 1:57 PM

Make sure your forks are not bound up on the axle, if they are they will be sticky and not absorb bumps when the front is light under acceleration and wiggle side to side. Bleed the air out between motos as well The springs are a bit stiff front and ... more »

Added reply in a thread suspension re-valve: Pro Circuit, Factory Connection, ENZO, or Race Tech? 4/8/2015 1:31 PM

I have a 2013 CRF450R and own a suspension shop in Australia, you will gain a big improvement with a good set up. The stock forks are very average and the shock not a whole lot better but can be made to work really well and I'm pretty sure FC will have ... more »

Added reply in a thread Fork Question CRF 9/5/2014 2:19 PM

They will bolt right up, dont like your air forks Im guessing ?

Liked a comment on the item Crush's KTM 350SXF - Done! 9/4/2014 1:25 PM

Bike of the Day! 9-4-14

Liked a comment on the item Crush's KTM 350SXF - Done! 9/4/2014 1:25 PM

Also thanks to Greg at BTOsports.com and Sammy at SK Designs. Much appreciated!

Liked a comment on the item First Impressions: Riding the 2015 Yamaha YZ450F 8/27/2014 8:11 PM

Sick wheelie at 2:10!

Liked a comment on the item First Impressions: Riding the 2015 Yamaha YZ450F 8/27/2014 8:11 PM

can ride

Added reply in a thread Aussies! What tyres are ya running? 2/1/2014 12:31 PM

Get a set of Pirelli Mid Soft 32 they will work on everything if you want a more hardpack rear the 554 is really good. Make sure you get the 120/80x19 rear, there are 2 front sizes 80/100 or 90/90x21 the 90 will be better on hard but will climb the ruts ... more »

Added a comment about photo Dean Ferris 1/2/2014 4:16 PM
C138_010114ktm010

He saw the catering truck coming through the gate

0 0 0

This photo has 1 comment.

Added a comment to benno387's profile 12/31/2013 7:26 PM
C50_sx15_rd2_crawford_03_1455418332

Factory Spec in Sydney 0418 804 274

0 0 0

This user profile has no comments yet.

Added reply in a thread Enzo or Factory Connection? 12/19/2013 5:02 PM

ENZO

Added a comment about video Race Tech - Rider Profile: Chris Blose 12/19/2013 4:56 PM
C138x104

Roger that, worked on suspension for Chris when he was in Australia for SX in 2011 really good guy

0 0 0

This video has 2 comments.

Liked a comment on the item Race Tech - Rider Profile: Chris Blose 12/19/2013 4:55 PM

He is such a good dude. Glad i got know him! See ya again soon buddie!!

Liked a comment on the item KTM 250SX 2013 FMF KTM BRIGADE REPLICA 12/11/2013 9:40 PM

Bike of the Day for 12.11.13!

Looks awesome. Lotta elbow grease into that one I'm sure

Liked a bike check KTM 250SX 2013 FMF KTM BRIGADE REPLICA 12/11/2013 9:39 PM
C138_biek_of_the_week