Digger29's Forum Activity

Reply to Well here it is, the KTM SXF 450 Factory Edition 2016 5/30/2016 7:03 AM

Thanks Lumpy and you were definitely right on the blue hoses. Thx brother :-)

Reply to Well here it is, the KTM SXF 450 Factory Edition 2016 5/27/2016 5:22 AM

All of the plastic is OEM KTM stuff except the shrouds. I wanted all orange shrouds and when I bought the stuff last fall Acerbis was the only company that had all orange shroud at the time. The orange is spot on though. The graphics are from a local ... more »

Reply to Well here it is, the KTM SXF 450 Factory Edition 2016 5/26/2016 3:01 PM

The kid I sold my 15 FE450 to decided that he was sticking to offroad and bought a 16 350XCF. He stripped all of the parts off of it and sold it for a $100 less than he paid me for it (great deal there) He kept listing the pipe locally & I kept low ... more »

Reply to Well here it is, the KTM SXF 450 Factory Edition 2016 5/26/2016 2:32 PM

Finally got around to throwing on the orange plastic that I bought my 15 FE450 last fall. I think the bike looks way better all orange. Just my 2 cents though :-)

Reply to Well here it is, the KTM SXF 450 Factory Edition 2016 5/24/2016 9:16 AM

Yup, a few fast guys here in New England are running their forks up in the clamps a little past the 2nd line and both of them are running 9.4 bar in the air side and then stiffening the compression with great results.

Reply to White power extremes or Rm conventional 5/21/2016 7:10 AM

I have no experience with those WP forks but I did run a set of 98 RM conventional forks on my 07 RM250 for a whole season and they were super plush and very forgiving on the mistakes. Parts were readily available and they were damn good forks so I'd ... more »

Reply to Well here it is, the KTM SXF 450 Factory Edition 2016 5/19/2016 5:38 AM

14K after fees?? That's crazy high. My buddy back here in Ma just bought 2 new FE 450s for $9800 out the door and that's quite a bit more than I paid for mine.

Reply to Looking for WP Cone Valve forks and WP Trax rear shock for 2016 KTM 450 SX-F 5/19/2016 5:06 AM

Text me 508 243 1232 Mike

Reply to Looking for WP Cone Valve forks and WP Trax rear shock for 2016 KTM 450 SX-F 5/18/2016 4:48 PM

What prices are you getting?

Reply to 2017 Husqvarna Motocross Line! (New TC 250 2-stroke) 5/10/2016 3:34 PM

Glad to be of service :-) The bikes look awesome and it's about time they went to a 38 carb and 14X50 gearing. I figured these things out in the summer of 12 when I got my 13 250SX.

Reply to Best color graphics for 2016 ktm 5/4/2016 1:13 PM

I've have a local kid Aggressive Graphix here in Ma trying and I feel he's got it as close as we're going to get it. I have a complete set of orange plastic that I'm going to put on my FE and he's doing the graphics right now. He came over here with ... more »

Reply to Well here it is, the KTM SXF 450 Factory Edition 2016 5/2/2016 8:15 PM

I wouldn't even consider it the old orange. They're very dull and flat looking clay color of orange. Don't buy them Joe because you'll be VERY disappointed with them.

Reply to Well here it is, the KTM SXF 450 Factory Edition 2016 5/2/2016 2:59 PM

OMG yes..... I have those POS's on my bench. The color was terrible and they fit like shit so I took them off within 5 mins. Needless to say they won't be on my bike :-)

Reply to Well here it is, the KTM SXF 450 Factory Edition 2016 5/2/2016 11:22 AM

Yes, the 14 FE450 top clamp drops right on the 16s. Last yr after a cpl very low speed crashes and each time getting up to my bars twisted (quite annoying) I was trying figure out a better set up. This is the cheapest way for me because I really didn't

... more »
Reply to How to get more performance with rm250 4/30/2016 10:16 AM

Thx :-) I'm going to dig up some pics of my 03 because I know I had a 9oz flywheel weight on it but I just can't remember if I needed a cover spacer or not.

Reply to How to get more performance with rm250 4/30/2016 5:35 AM

Yes, the Racers Choice 808 YZ250 piston is a straight drop in for your 03 and I'm 99% that you'll need a cover spacer for anything over an 8oz flywheel weight on a RM250

Reply to Is parking for MetLife/NYC/East Rutherford SX sold out? 4/29/2016 11:44 AM

Not a chance of the parking being sold out because I went to the last 2 SX's there and their lots are huge and there's plenty of parking. It looked like some lots were near empty on the backside of the stadium.

Reply to Well here it is, the KTM SXF 450 Factory Edition 2016 4/27/2016 6:28 AM

Oh... they're awesome and worth every penny! I wonder why yours have black DLC lower tubes and mine have brown-ish gold ones. Hmmm, interesting.

Reply to How to get more performance with rm250 4/22/2016 7:33 AM

They replied back to me that they did make them but hadn't made any in quite and would gladly make me a pr if I was willing to wait like 3wks and it was in the email that were all done and ready to be shipped that they said if I was ever in a pinch that ... more »

Reply to Steering stabilizer on '16 KTM 4/22/2016 6:14 AM

Great one! I just spit my coffee out :-)